Grilled some burgers for lunch today. While brushing off the grates my daughter showed me an article where people were getting broken wire brush pieces in their food and this caused serious problems. Did some research and found that a wooden grill scraper is a popular alternative to a wire brush. So decided to make one this afternoon. Took about an 1.5 hours(including beer break)
Started out with a oak 1X6 I had in my attic. Cut it to 20"
[/IMG]
Drew out my design in pencil.
[/IMG]
Cut out the rough shape with my jig saw
[/IMG]
Sanded the end down to a point with a belt sander.
[/IMG]
Rounded off all of the edges.
[/IMG]
Finished it off with some mineral oil.
[/IMG]
Going to cook some pork chops for dinner so I'll get a chance to use it today.
Started out with a oak 1X6 I had in my attic. Cut it to 20"
Drew out my design in pencil.
Cut out the rough shape with my jig saw
Sanded the end down to a point with a belt sander.
Rounded off all of the edges.
Finished it off with some mineral oil.
Going to cook some pork chops for dinner so I'll get a chance to use it today.