Weber Parts Deals


 
Bruce said:
Oh, yah, those are the Votenli ones. Those have been my go to for Silver B's for the last two years. I have probably bought 20 sets of them. But, it seems the last sets that I bought have an issue with the burners. The middle burner is too short or the set is just designed wrong in that the middle burner is able to slide to the left and OFF the valve when they are installed. I have taken to welding a mod to solve that issue, but it is one extra step I don't think I should have to deal with. And without the modification, it is clearly a safety issue. The quality of the bars and burners is otherwise very good, especially the flavorizer bars.

These Qulimetal ones seem to have specs that at least match the Votenli ones. I will compare when I get my set and post back.
Click to expand...
I got my burners and bars today. After a quick look, they look and feel like 16 ga bars and both them and the burners are non-magnetic. I didn't look much at the burners, but they look similar to the Votenli ones but with a bit better attention to detail. I will report back when I investigate further and/or use them in a rehab. I am thinking they are going to be my go to over the Votenli selection, but, I may have to invest in several sets now to get the price reduction.
 
Bruce said:
Oh, yah, those are the Votenli ones. Those have been my go to for Silver B's for the last two years. I have probably bought 20 sets of them. But, it seems the last sets that I bought have an issue with the burners. The middle burner is too short or the set is just designed wrong in that the middle burner is able to slide to the left and OFF the valve when they are installed. I have taken to welding a mod to solve that issue, but it is one extra step I don't think I should have to deal with. And without the modification, it is clearly a safety issue. The quality of the bars and burners is otherwise very good, especially the flavorizer bars.

These Qulimetal ones seem to have specs that at least match the Votenli ones. I will compare when I get my set and post back.
Click to expand...
Bruce, you should definitely try a set of direct store burner tubes. I bought a set for my Gold C restoration and they were perfect in every way for $21.
 
MarkCuda said:
My SilverB won't sell now, I sure don't need to rehab anymore 😑

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com
Click to expand...
Hang in there, Mark. There is a buyer out there. One thing you could consider is doing if the wait gets too long is the "black" treatment making the burner knobs and handle black - maybe even the end pieces - and then re-listing.
 
MarkCuda said:
My crossover tube always falls out, the listing says 13 and a half inch but true measurement is 13 and one eighth.
Little bastards can't read a tape measure
Click to expand...
Is this for an x000 ?

MarkCuda said:
Yup, I'm a idiot, I was thinking the 13 flavorizer bar cookbox.
Thank you
Click to expand...

If you are talking about crossover tubes, I've had bad luck getting burner sets with the correct one.

I ended up ordering some from grillparts.com and they are the proper length.

DanHoo

Thread 'need help finding burners for genesis 1000 that have the correct length crossover tube'

Does anyone have a recommendation for a set of burners with the proper length crossover tube for a Genesis 1000 / Genesis 3 cookbox?

The ones I've ordered recently have too short of a cross over tube.

I need 13 1/2 yet I'm getting ones with 12 3/4.


more details...

last Wednesday I received a set of these burners: https://www.amazon.com/gp/product/B09726DWSM/?tag=tvwb-20

  • DIMENSIONS: Includes all three burners and the cross over tube. Front and rear burners measure 29 1/8" long and center burner is 28 7/8". The crossover burner is 13 1/2" long; Material: Stainless Steel...
  • Like
 
You must log in or register to reply here.

 

Back
Top