Recent content by Greg Powers

Do you have a second thermo? If so, put one in each bird. That way you can tell if one is cooking noticeably faster and switch places if needed.

Naughty Nurses BBQ

I just bought a welding blanket, cut holes for the vent and thermo.

I don't know what is available in your area, Maverick thermometers are popular here as are the Thermoworks. The Thermopop is becoming one of my favorites. Whatever you get, do a ice water and/or boiling water calibration to see how accurate it is.

IMO the Costco prime is as good as the Creekstone and much cheaper. The SRF has a different flavor and mouth feel and is worth experiencing at least once. There is a reason so many of the top competition cooks use it.

Dear Kingsford, Drop off 2 or 3 bags at spot #625 and I'll try them during the Open competition. :D:wsm:

I ordered the hinge/gasket combo through Amazon, and agree with Troy wholeheartedly. I also put the gasket on the door and have much better temp control. The hinge and casters, along with latches to secure the middle to the bottom, make things much easier.

I'm with Dustin. Is this a home made sausage? If it's cured you have lots of time. If it's fresh then you need to get it out of the danger zone, meaning an internal temp of at least 140°, fairly quickly.

I've never noticed that much of a gamey taste in hogs. Javelina on the other hand are almost inedible.

Pancakes, eggs, & hash browns are things I've done on mine and I'm sure there is more.

I was having the same issue with my 22", Saturday I installed latches to secure the body to the bottom section and put a gasket on the door. Sunday I cooked ribs; when done I closed all vents and went to lunch. 1 1/2 hours later the WSM was cold. Temp control was much easier as well.

I'm with Nick, hang for 2 hours then foil and place on top rack. Except I have a Hunsaker vortex fire basket in mine. I think if one went to "fall off the bone" tender, the hook might let go but I'm not sure. As the fat melts is runs down the rib, self basting so to speak. This may be why the...

A lot of good advice, I'll just add: there is nothing wrong with cooking at 275°

The rivets in my vents seemed to get worn and loose over time so I drilled them out and replace the rivets with a 1/4" SS bolt and nut. I can now keep the vent tight against the body of the WSM which allows better air control.

It's true that size matters. I have smoked 8 butts on my 22" more than once, and 8 butts fit better than 6 butts on a 18". If you ever want to play with hanging meats, the extra height of the 22" will come in real handy. Don't sweat the charcoal usage. You can always buy or make a smaller...