Search results

Xfinity wifi modem(It sucks) Using No-Ip service I want to solve this problem that I have been trying to figure out for a good long time. Problem......I can not connect to the Heatermeter off home network. I can resolve my No-ip address on my home network, just fine. So I can type 10.0.0.69...

OK, this one has me stumped. I am fixing someone board and on the original main board had some issues and I figured I would just re-do the whole board, which I did. I kept the thermocouple Amp, the DC/DC, and some of the other parts. I completely changed out all the resistors and caps...

Some new Heatermeters. These boards, I believe are called "After Dark" on OSH. I like the look of them. Two of these are spoken for, Atm.

AD8495 Ebay saler has a board for 3d printers, that uses the Ad8495. I purchaded a single board last month and it came as expected. I removed the chip from the board and soldered it to the Heatermeter, and it too works as it should. This time, I ordered the dual probe board and for $14(if...

Im not able to log in too Thingiverse to get the correct stl files as soething is wrong with logging into that site. I have tried all work arounds and even reset password a few times and still cant get the site to work. So, I need an older 4.3.3 case that uses all the orginal components and is...

Found a little gold mine. If someone is looking for one, send me a message. I am not going to get rid of them all though. Some old HM buttons(5-way toggle buttons)

It's been a pretty long time since I had to make post, but I have a problem since I downloaded the newest stable version. My HM connects to my wifi without issue and after it connects I can also connect to it without issue. But, if I don't connect to it after a while, I'm not able to connect...

I have a new xfinity modem/router which has the wifi6. I usually don't use the router part of the modem, but this modem has been rock solid and very fast wifi. That being said, I'm at my wits end when trying to get my Noip.com address to work with xfinity's port forwarding. I have had no luck...

Just saw this today on my Facebook page and thought I would pass it along as I cut have used this service 3 weeks ago when I welded up my firepit insert. Cheap cheap I could have got my parts cut and delivered for 200 10 gauge steel, and I had local quotes for 700. In the end I did it myself...

Well, I have an issue that I have been trying to figure out with my port forwarding on my router. I have been trying to get Octoprint to be forward, so that I can view my 3d printer off network. But, nothing seems to work. My ip 192.168.103, and I put that into my port forwarding settings for...

I have been looking for any supplier of the amp, with no luck. Mouser does not expect them until October 2019, digikey is out of stock, arrow is out of stock, everybody is out of stock. I'm about to bight the bullet and buy some circuit boards that already have them soldered and remove them...

At work, the owner bought a Lorex 5100 series security system and when I try to log into the system via IP address I keep getting I must download and install plug-in for NPAPI. But, it doesn't work on all browser except Explorer. I also tried to Port forward and logged on my phone and I get...

One of my favorite places to order components from is Arrow.com. Today, I happened to be ordering some TC amps and found that they are offering free Pi's with a $50 order. As always they have free overnight delivery also.

For those that don't know, Byran lives in Florida and so I just hope he and his family, including everybody else in Florida, stays safe. I would believe any orders for heatermeter kits may be delayed, some. Not sure how much Tampa will be effected by the hurricane. Anyways, If you read...

Arrow has a 20% off RPi 3s until the 8th and free overnight shipping, if anybody is interested in buying some Pi's.

I recently received a heatermeter, that looks like it got wet, it ruined the Pi, and I had to replace the LCD. It works, except the blower and the servo. Here is what I see. Plug in the heatermeter and nothing wrong so far. Blower is 0% Manually change blower to 10g+ and the mosfet...

Just finished my paint job on my smoker after about 4 years of rust and neglect. All the paint used is rated for high heat, so hopefully it last a while. And we'll, "Go, Hawks

http://www.thermoworks.com/TX-1008X-PX?tw=VWB&chan=TVWBB I never saw this before, has anybody tried them with the heatermeter. This is very nice.

I received a heatermeter from a gentleman from Switzerland in which his heatermeter needed a ton of solder removed and some resoldering. I was able to get it to work, but I have one small problem with the feedback circuit. So far, I replaced a bs170, and reticifier. When the HM gets above...

Was doing some searching on Thingiverse and found this. Looks pretty good. Its all in German though https://www.youtube.com/watch?v=EFrlnIE7UTo https://www.grillsportverein.de/forum/threads/wlan-thermometer-mini-v2.273068/