Greg Maciejewski
TVWBB Member
Here is my version of a WSM Wind/Rain Screen. I built this so I could use my WSM in windy/rainy conditions.
Main features:
1) Portable - What makes this enclosure unique is that it is able to be assembled and disassembled without the use of tools. It can easily be assembled/disassembled in less than 5 minutes.
2) Construction:
a) Tongue & Groove - Made with tongue and groove pine that is water sealed to make the enclosure water resistant.
b) Pressure Treated Base - The base is made of pressure treated 4 x 4's with aluminum flashing coated floor boards.
c) Roof - The roof is constructed at an angle to allow rain to run off.
d) Door - Magnetic latching door with stainless steel hinges.
3) Conveniences:
a) Lid hanging rack - Allows for the hanging of the WSM lid.
b) BBQ Guru DigiQ II mounting Plate – Can mount DigiQ II on outside of enclosure to make monitoring of the pit from the outside of the enclosure easier.
c) AC Power cord channel in base – Allows rain proof AC power connect to DigiQ II.
d) Interior Dimensions 2' 3" x 2' 6" - Can accommodate either the 18.5" WSM or the 22.5" WSM.
I created pdf plans if anyone is interested.
Here is a link to some more pictures:
more pictures
Note from Moderator: You can download the PDF plans for this project at http://virtualweberbullet.com/...temp.html#smokeshack
Main features:
1) Portable - What makes this enclosure unique is that it is able to be assembled and disassembled without the use of tools. It can easily be assembled/disassembled in less than 5 minutes.
2) Construction:
a) Tongue & Groove - Made with tongue and groove pine that is water sealed to make the enclosure water resistant.
b) Pressure Treated Base - The base is made of pressure treated 4 x 4's with aluminum flashing coated floor boards.
c) Roof - The roof is constructed at an angle to allow rain to run off.
d) Door - Magnetic latching door with stainless steel hinges.
3) Conveniences:
a) Lid hanging rack - Allows for the hanging of the WSM lid.
b) BBQ Guru DigiQ II mounting Plate – Can mount DigiQ II on outside of enclosure to make monitoring of the pit from the outside of the enclosure easier.
c) AC Power cord channel in base – Allows rain proof AC power connect to DigiQ II.
d) Interior Dimensions 2' 3" x 2' 6" - Can accommodate either the 18.5" WSM or the 22.5" WSM.
I created pdf plans if anyone is interested.


Here is a link to some more pictures:
more pictures
Note from Moderator: You can download the PDF plans for this project at http://virtualweberbullet.com/...temp.html#smokeshack