Way to go, DanHoo! You are being generous and very helpful; it's what makes TVWBB a great place!@JamesMT I would convert it to an E330. The sear burner is a game changer.
You already have and would use:
3 main burners
3 knobs
3 main valves
E330 cookbox
You will need:
E330 manifold ( without valves )
Sear burner
Sear valve
Sear knob
front control panel with the extra cut-out for a sear burner.
Igniter kit for the E330 ( 4 wire)
Sear Burner: $25
Weber Grill Parts | Propane (LP) "Sear" Burner, Genesis 330 "Model Years 2011-2016" | Burner Components | grillparts.com
Weber Grill Parts: Propane (LP) "Sear" Burner, Genesis 330 "Model Years 2011-2016" & more Burner Components from grillparts.comgrillparts.com
Sear Valve: $25
Weber Grill Parts | "Natural Gas" SEAR Burner Control Valve, Genesis 300 Series (Model Years 2011-2016) | Hoses, Valves and Regulators | grillparts.com
Weber Grill Parts: "Natural Gas" SEAR Burner Control Valve, Genesis 300 Series (Model Years 2011-2016) & more Hoses, Valves and Regulators from grillparts.comgrillparts.com
Sear Knob: $10
Weber Grill Parts | "Sear" Burner Control Knob, Genesis 330, "Model Years 2011-2016" | Grill Exterior | grillparts.com
Weber Grill Parts: "Sear" Burner Control Knob, Genesis 330, "Model Years 2011-2016" & more Grill Exterior from grillparts.comgrillparts.com
Igniter set for the E330 that has four outputs. $22
I believe I have an extra E330 bare manifold.
I believe I have an extra E330 control panel, but all the markings have worn off.
If I can dig these out of my garage, I'd send them for shipping costs, say $25 to $30 or so. maybe less.
So for about $120 or so you could upgrade it to an E330.
edit: if you are considering this, don't buy anything until I confirm I have the manifold and control panel.
Thanks. All I did was typeWay to go, DanHoo! You are being generous and very helpful; it's what makes TVWBB a great place!
IDK about foil but you could simply pop riven a piece of aluminum on that partI got it to light!!!. Ignited it with a lighter first then tried the igniter...worked like a charm. Just in time for the long weekend!
The only missing I noticed is the heat shield on the front side of the cookbox. Is this really necessary as its a $30 part. Would a temporary solution with aluminum foil suffice?
Left side inside is a stainless heat shield. I made one from some stainless sheet scrap from a dishwasher. I posted dimensions a while ago.let me see if I can find themThe only missing I noticed is the heat shield on the front side of the cookbox. Is this really necessary as its a $30 part. Would a temporary solution with aluminum foil suffice?
I wonder why that generation has the heat shield but the Genesis II generation doesn’t. Maybe they found it isn’t really necessary?Left side inside is a stainless heat shield. I made one from some stainless sheet scrap from a dishwasher. I posted dimensions a while ago.let me see if I can find them
Here it is. It is called a sear burner heat shield
Or they moved the ignitor controller away from the heatI wonder why that generation has the heat shield but the Genesis II generation doesn’t. Maybe they found it isn’t really necessary?