My "Weber" Restoration (Spoiler: HappyCooker)

[Kalibos M.]

I purchased this Kettle thinking it was an old Weber of some sort. I joined the forums looking for some insight to what I had just bought and well...
As you all can see, it's NOT a Weber. I decided to go ahead and clean it up replace any parts I could which has proven to be a bit of a headache.

I asked the original owner how long she had had it and she went inside and got the receipt. It was a wedding gift from 1978. She had the original receipt but asked me not to photo it because her late husband's name was on it and she was keeping it for sentimental reasons. It was a receipt from a Sears Roebuck's in Chicago, IL, where she and her husband were originally from, but it only said "portable grill - BROWN" with a five digit number next it. "07629" and had a "DELIVERED" stamped in red with the date 08/08/78 written in blue ink on the line under it and the initials "C.B."next to the date. That's all I can remember about the receipt.

I'll post more pictures of the process later on. Right now I'm trying to figure out how to get wheels to fit on it and what I can do about a riser for the front.

 

[Bruno]

Interesting grill, keep us posted.

 

[Randy]

Way cool . I'd like to know what it is too.

 

[Timothy F. Lewis]

That’s really cool on so many levels!

 

[Jeff Boudman]

I like it!

 

[DrewZ]

Happy Cookers are interesting grills, and the ability to raise and lower the cooking grate is a neat feature. But, they simply do not have the devoted following that Webers do. It should have an internal ash pan, which can be used in a 22" Weber.

I rehabbed a Happy Cooker in 2020 and had a hard time finding a taker for it. Here's the link to my rehab: Happy Cooker Rehab and a link to my Google album: Happy Cooker Album Mine came with its original wheels, but I had to fab up a riser for the front. (I cut off a T-shaped piece from an old Genesis frame that I had lying around).

Good luck!

 

[Kalibos M.]

Happy Cookers are interesting grills, and the ability to raise and lower the cooking grate is a neat feature. But, they simply do not have the devoted following that Webers do. It should have an internal ash pan, which can be used in a 22" Weber.

I rehabbed a Happy Cooker in 2020 and had a hard time finding a taker for it. Here's the link to my rehab: Happy Cooker Rehab and a link to my Google album: Happy Cooker Album Mine came with its original wheels, but I had to fab up a riser for the front. (I cut off a T-shaped piece from an old Genesis frame that I had lying around).

Good luck!

It does have an ash pan! I was trying to figure out what that was, thank you! At first I thought it was for putting coals into but then I was like, "... but there's a small grate for coals to sit on."

 

[Kalibos M.]

Got it taken apart to clean it. I didn't think to take progress pictures until after I reached this step. I had already been cleaning it for about 30 minutes at this point. The only tools I used were a dish sponge, a plastic paint scraper and Dawn Dish Soap and paper towels.





Originally, the inside of the kettle looked much, much worse.





The clean spot is where I soaked the lid while cleaning the kettle, then gave it a once over with the dish sponge.
It didn't take much elbow grease, but I did take my time, letting it soak on new areas before going back at it.





The lid shined up really well, you can see that Big Texas Sky in it.





The inside of the kettle looks brand new, I can't believe this thing is 46 years old!

More pics to come.

 

[Kalibos M.]

Here's a look at the hardware I took out. This was after the first round of cleaning. I was able to source replacement hardware in Stainless Steel.

The two C brackets and 5/16"-18 double male 2.5 inch rod were completely covered in rust. I soaked them in vinegar for 24 hours, every 8 hours or so I took a brass brush to them and removed a layer of rust and put them back to soak. They came out pretty clean. Unfortunately, the front handle separated in soapy water and the laminate slid right off.

The post cap that's sitting off by itself didn't have a match on the other side so I'm not going to be able to reuse it.

Everything except those two brackets and the double male post was able to be replaced 1:1 with new hardware. No special parts or anything.



This is the lid hinge. It was in really good shape to begin with so it wasn't too hard to clean.



The hinge bracket came clean pretty easily in Dawn dish soap.



I decided to paint up the leg stand but forgot to take a good picture of the "before", I'm happy with the "after" but the best example I have of that part is here.



The brackets and double male post came out of that rusted post sitting next to the hinge bracket and were that level of rusted. It's hard to see in the picture, but the leg post is rusted from the base up to about three inches and the rust has penetrated underneath the enamel. I sanded, primed and painted it to prevent further rust breaching.

I'll post the "after" pics in my next update.

The two parts that look like black plastic geometric were attached to each other at one point, but it looks like they dry rotted and broke apart years ago. I took the remainder off the front foot. I'm going to need to source or 3D print some sort of replacement. I'm stumped about it for the moment, I'm going to need to put wheels on it before I can take measurements so I know I can get it level to the ground.

That's it for now.

 

[Kalibos M.]

This is the post that connects to the base of the ash pan.



I got it stripped down, primed and painted.




These are the brackets that hold it in place. They got the same treatment.




I think they came out pretty good.

Here's a look at how the C-Brackets fit in the Kettle Leg. And how the post couples with the ash pan.



The rust on the base of the Kettle Leg was seeping into the enamel, so I had to purge and paint to keep it from spreading further.




That's all I got for now. I'll keep posting my progress pics if anyone is interested. I'm waiting for the paint to cure on the Kettle Leg before I do some fittings to it.


``

 

[Steve Hoch]

Looking good!

 

[Jon Tofte]

Very interesting project. You are doing an excellent, careful restore. I will be watching to see more!

 

[Joe Anshien]

Very cool project and very nice work restoring it.

 

[Timothy F. Lewis]

Nice work! I like the “spray booth”!!