covering hole in bowl left by ignition system?

[Jeff Davidson]

Hi,

I removed my ignition system from my performer and how have about a two inch hole I'd like to cover. is there some sort of thermal tape I should use? other ideas?

tia!

 

[Bob Correll]

Might be temporary, but a ball of HD foil until a better idea comes along.

 

[Timothy F. Lewis]

Large washers and a short bolt?

 

[Robert-R]

Large washers and a short bolt?

Good idea. Fender washers would be my choice. The inside one would probably conform to the shape of the bowl.

You could also try metal tape - the stuff they sell at auto part stores. Home Depot might have it, also.

 

[Jeff Davidson]

Good idea. Fender washers would be my choice. The inside one would probably conform to the shape of the bowl.

You could also try metal tape - the stuff they sell at auto part stores. Home Depot might have it, also.

thanks so two, two-inch diamater fender washers with a short bolt between them?

 

[Dwain Pannell]

What about a 2" metal plug? https://www.google.com/search?q=2"+...A&biw=768&bih=928&dpr=2#imgrc=IECg6LE0GrYqKM:

 

[James N]

What about a 2" metal plug? https://www.google.com/search?q=2"+...A&biw=768&bih=928&dpr=2#imgrc=IECg6LE0GrYqKM:

That's the way I'd go.

 

[Robert-R]

What about a 2" metal plug? https://www.google.com/search?q=2"+...A&biw=768&bih=928&dpr=2#imgrc=IECg6LE0GrYqKM:

That's the way I'd go.

Gotta agree! That should work.

 

[Timothy F. Lewis]

I bow to the metal plug repair! Excellent suggestion!