Originally posted by Jay W:
Actually extremely easy. I wish I had taken pictures now.
The hardest part was finding a drill bit small enough. I had a natural gas orifice from another conversion kit for comparison of the hole diameter.
It's a brass fitting, so I put it on my drill press and it literally took 1 second for each hole, 3 holes in total.
After that it was just a matter of resealing all the threads and putting it back together.
I am so impressed with how it works, I may actually take it apart again at some point and do a write up so those that want to do it can see how easy and cheap it is.
Hey Gary,
Way easier then that, only 3 holes drilled in total. It's a size 60 that I used.
Like I said, when I get some time, I'll do a write up.
Jay
Oddly when I did my brother's Summit it had a completely different type of valve and no "adjustment" was needed.