Stokerlog Version 6


 
Ok kids I setup my new Stoker tonight and connected to it's internal web server just fine.

So I thought I'd try the Stokerlog. I installed 6.7 with no errors. I set it to run as administrator in the Compatibility tab and ran the Stokerlog.exe.

I get nothing. I see that for about 10 seconds it runs in task manager.

This is a new laptop with the following:
Windows 7 SP1 x64
No A/V currently as this is a test machine.
.Net 4 is installed.

So what am I missing.
 
Amir that is correct. I get no GUI. I see that the stokerlog.exe process runs in Task Manager for ~10-20 seconds and then closes.

I turned off User Access Control to see if that had any bearing and it did not.
 
My troubleshooting mojo must be off Amir.

Here is all I could find in the Event logs:
Log Name: Application
Source: .NET Runtime
Date: 6/30/2011 4:13:51 PM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ****
Description:
Application: StokerLog.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.InvalidOperationException
Stack:
at StokerLog.My.MyProject+MyForms.Create__Instance__[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](System.__Canon)
at StokerLog.My.MyProject+MyForms.get_StokerLog()
at StokerLog.StokerLog.Main()

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-30T20:13:51.000000000Z" />
<EventRecordID>2586</EventRecordID>
<Channel>Application</Channel>
<Computer>****</Computer>
<Security />
</System>
<EventData>
<Data>Application: StokerLog.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.InvalidOperationException
Stack:
at StokerLog.My.MyProject+MyForms.Create__Instance__[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](System.__Canon)
at StokerLog.My.MyProject+MyForms.get_StokerLog()
at StokerLog.StokerLog.Main()
</Data>
</EventData>
</Event>

Log Name: Application
Source: Application Error
Date: 6/30/2011 4:13:52 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ****
Description:
Faulting application name: StokerLog.exe, version: 1.0.0.0, time stamp: 0x4c7ca922
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17514, time stamp: 0x4ce7bafa
Exception code: 0xe0434352
Fault offset: 0x0000b727
Faulting process id: 0x5c0
Faulting application start time: 0x01cc37623a354b95
Faulting application path: C:\Program Files (x86)\AmirM Software\StokerLog\StokerLog.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 78cb0d95-a355-11e0-9031-001fe1d34a48
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-30T20:13:52.000000000Z" />
<EventRecordID>2587</EventRecordID>
<Channel>Application</Channel>
<Computer>****</Computer>
<Security />
</System>
<EventData>
<Data>StokerLog.exe</Data>
<Data>1.0.0.0</Data>
<Data>4c7ca922</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.17514</Data>
<Data>4ce7bafa</Data>
<Data>e0434352</Data>
<Data>0000b727</Data>
<Data>5c0</Data>
<Data>01cc37623a354b95</Data>
<Data>C:\Program Files (x86)\AmirM Software\StokerLog\StokerLog.exe</Data>
<Data>C:\Windows\syswow64\KERNELBASE.dll</Data>
<Data>78cb0d95-a355-11e0-9031-001fe1d34a48</Data>
</EventData>
</Event>

Log Name: Application
Source: Windows Error Reporting
Date: 6/30/2011 4:13:55 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: ****
Description:
Fault bucket 1706046120, type 5
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: stokerlog.exe
P2: 1.0.0.0
P3: 4c7ca922
P4: System.Windows.Forms
P5: 4.0.0.0
P6: 4ba1e14e
P7: c2a
P8: 36
P9: System.InvalidOperationException
P10:

Attached files:
C:\Users\****\AppData\Local\Temp\WER8548.tmp.WERInternalMetadata.xml

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_stokerlog.exe_c84f35ce6fdf1472b070e3aa123bcd46eac0b7_06159188

Analysis symbol:
Rechecking for solution: 0
Report Id: 78cb0d95-a355-11e0-9031-001fe1d34a48
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-30T20:13:55.000000000Z" />
<EventRecordID>2588</EventRecordID>
<Channel>Application</Channel>
<Computer>****</Computer>
<Security />
</System>
<EventData>
<Data>1706046120</Data>
<Data>5</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>stokerlog.exe</Data>
<Data>1.0.0.0</Data>
<Data>4c7ca922</Data>
<Data>System.Windows.Forms</Data>
<Data>4.0.0.0</Data>
<Data>4ba1e14e</Data>
<Data>c2a</Data>
<Data>36</Data>
<Data>System.InvalidOperationException</Data>
<Data>
</Data>
<Data>
C:\Users\****\AppData\Local\Temp\WER8548.tmp.WERInternalMetadata.xml</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_stokerlog.exe_c84f35ce6fdf1472b070e3aa123bcd46eac0b7_06159188</Data>
<Data>
</Data>
<Data>0</Data>
<Data>78cb0d95-a355-11e0-9031-001fe1d34a48</Data>
<Data>0</Data>
</EventData>
</Event>
 
Mike, I have only seen generic versions of this problem where Windows loads some programs, but on others, apps hang on start up and don't show a UI. Tried to troubleshoot a PC at work and after many hours, gave up and re-installed Windows.

Stokerlog does very little on start-up. It simply reads the registry to load its old settings and then shows the UI. Little can go wrong in that code.

The other options is to re-download and install again. I recall one problem that was caused by that. It is a very log shot though.

Let me know if you make any progress on it.
 
Amir,

It looks to be an issue with Windows 7 SP1. That's my best guess at least. Installing it on the same setup w/out SP1 works just fine.
 
It looks to be an issue with Windows 7 SP1. That's my best guess at least. Installing it on the same setup w/out SP1 works just fine.
Click to expand...

It works for me fine on both 32 and 64 bit Win7 with SP1.
 
Originally posted by Peter_M:
It works for me fine on both 32 and 64 bit Win7 with SP1.
Click to expand...

Peter what version(s) of .Net do you have installed. This is driving me nuts not being able to use Stokerlog on this laptop as my only other laptop is running Ubuntu.
 
Peter what version(s) of .Net do you have installed. This is driving me nuts not being able to use Stokerlog on this laptop as my only other laptop is running Ubuntu.
Click to expand...

I'm running .Net 4.0.30319 on both machines.
 
Well I'm happy to say that after reinstalling Windows 7 (not SP1 yet) I'm able to run Stokerlog just fine.

I will try to upgrade to SP1 at a later date but for now, it's not that important. I want to get to work on Stokerlog...I do enough Windows admin work during the day...

Amir thank you for this software. It looks pretty awesome!
 
My pleasure Mike. Kind words like that have certainly paid for the development multiple times over!
icon_smile.gif
 
Thanks to StokerLog I'm a better cook.

Next revision?
Ideas of new features.
Ramp by food temps.
Save a cook / graphic for future recall like to add notes etc.
Export of the data points for use in Excel.
 
Hi folks, I'm in the middle of my first smoke using a Stoker. StokerLog configured up painlessly and so far so good. I do have a couple of questions, though. Is there currently any way to get Stokerlog data off the LAN and onto the Internet? When I host a barbecue party, I'd love for my guests to be able to access a site showing the status of "dinner" that they can check on their computers or smartphones whilst enroute (yes, I have extremely geeky friends!). Speaking of Smartphones, is there any sort of Android control app that would let me see the status of my stoker and control it remotely?

Also, what of Twitter? I tried the SuperTweet.Net solution as shown in the Stoker manual. I'm getting no errors, but no tweets either. Is there any way of making this function work as of yet?

Thanks in advance.
 
Yes you can set the Stoker for WAN access. On Rocksbbq website under documents explains how to do this except for issues when your ISP blocks PORT 80. There are work arounds dependent upon the router you have.

As for a SmartPhone app. A person on the BBQ brethren is developing one which should be released within the next month according to his last email to me. Until then, you can access the Stoker Status page with a SmartPhone web browser.
 
OK, great. I read through the document but it appears that, being on Verizon, they're blocking port 80. Any idea on how to do this on a Linksys WRT-54g?
 
I'm not sure what I am doing wrong, but the fan doesnt seem to be reporting its status to Stokerlog. I've assigned the blower to the sensor so thats not the issue, any ideas?

Thanks!
 
You must log in or register to reply here.

 

Back
Top