Maintaining 1986 One Touch Silver

[Karl Freienmuth]

Hello all. I'm in the process of some maintenance work on my Red One Touch Silver that was purchased in 1986. It has an "H" stamped in the top damper.
I broke off the thumb screw (it was rusted) in an effort to disassemble & straighten the 3 worn out ash sweeper thingies. I am looking to replace Cleaning System entirely & am not sure which one to purchase.
Can someone direct me to which one I need & where to purchase it?
I'd be interested in a couple new 6" wheels also.
Thank you kindly!!

I hope this is the correct place to ask.

 

[Brian O'Neal]

Most Ace stores sell the ash sweeper, the wheels, sometimes older Ace stores have them, otherwise Weber....

 

[Chris Allingham]

Here's the one-touch replacement part you need, available at most stores that carry Weber products, or by calling Weber at 800-446-1071: http://www.amazon.com/exec/obidos/ASIN/B005LVAZ3A/thevirtualweberb

And here's the 6" wheel: http://www.amazon.com/exec/obidos/ASIN/B00023CWRY/thevirtualweberb

 

[Bill Farmer]

Try this site http://www.ereplacementparts.com/weber-parts-c-193079.html

 

[Dwain Pannell]

Try this site http://www.ereplacementpoarts.com/weber-parts-c-193079.html

Naturally, I'd go with whichever one is cheaper in this day and age, but I'd probably call Weber first to see if they're cheaper, then go with Chris's link to his Amazon tip to help support the site. Then to an off-site dealer as a last resort.

 

[Karl Freienmuth]

Thank you fellas! I believe I'll be able to locate what I need from your information.
I appreciate your prompt reply's!
This is one informative forum!

 

[Jim W.]

I just had the same issue and replaced my ash damper with the part Chris linked above. To get the old bits off I hacksawed the ash catcher handle off adjacent to the big nut. Then the bottom washer came off and the rest came out from inside. The new parts just nest together with no bolts to seize in the future.

Note on the wheels- you can get a complete kit with the wheels, legs, axle, and bottom rack for about $30.

 

[Karl Freienmuth]

I just had the same issue and replaced my ash damper with the part Chris linked above. To get the old bits off I hacksawed the ash catcher handle off adjacent to the big nut. Then the bottom washer came off and the rest came out from inside. The new parts just nest together with no bolts to seize in the future.

Note on the wheels- you can get a complete kit with the wheels, legs, axle, and bottom rack for about $30.

Thanks for that!
I haven't seen the complete kit you mentioned.... but will keep looking.

 

[Chris Allingham]

Note on the wheels- you can get a complete kit with the wheels, legs, axle, and bottom rack for about $30.

That's another good option. This is a good one to order from Weber directly.