Page 22 of 22 FirstFirst ... 12202122
Results 211 to 220 of 220

Thread: The Adapt-a-Damper - Open Source Project

  1. #211
    TVWBB Member
    Join Date
    Jan 2015
    Location
    New Fairfield, CT
    Posts
    52
    Wait... does that go over the adapter thats on thingiverse?

  2. #212
    New Member
    Join Date
    Apr 2017
    Location
    N.Ireland
    Posts
    10
    Hi all

    I’m getting the Adapt-A-Damper printed, Delta fan 6.7 CFM version. Also I’m going to get the BBQ Guru Universal Weber Adapter from BBQGurn European site for my WSM 18.5. Will this fit the Adapt-a-damper? See below link.

    Thanks

    Brian.

    http://store.bbqguru.eu/Sm-Universal-Weber-Adaptor

  3. #213
    New Member
    Join Date
    Apr 2017
    Location
    N.Ireland
    Posts
    10
    Quote Originally Posted by WBegg View Post
    I designed the adapter to fit the guru, as I use the same one. Tight fit, but seals good. Should be good to go, mate! The top case and adapter are the same for V1 and V2.
    Think i found the answer.

  4. #214
    New Member
    Join Date
    Mar 2017
    Location
    Sterling, VA
    Posts
    5
    I may have overlooked this or way overthinking this, but can someone point me in the direction of a wiring diagram for the ethernet jack?

  5. #215
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    552
    Fan:

    4-Ground
    5-12V

    Servo:

    4-Ground
    3-5V
    6-Servo Signal Wire

  6. #216
    TVWBB Fan
    Join Date
    May 2011
    Location
    San Francisco Bay Area, California
    Posts
    181
    What PID and fan settings are recommended for an 18.5" WSM?

  7. #217
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    552
    Quote Originally Posted by Mache View Post
    What PID and fan settings are recommended for an 18.5" WSM?
    I use the stock settings, and run fan at 40% Max, servo fully open at 1%.

  8. #218
    TVWBB Fan
    Join Date
    Oct 2015
    Location
    Minnesota
    Posts
    126
    This may be answered somewhere else, but I can't find it.

    Is there a way to add threads to the smoker mount piece? (I don't see an individual picture of it in the list of pictures on Thingverse, but it is seen in the picture of the actual purple printed product, underneath the piece with the servo)
    I hoped it would come with 1" NPT threads to screw on a pipe, but it doesn't.

    I'm also guessing the opening of that piece in question - might be too large anyway, even if I could put 1" NPT threads in it.

  9. #219
    TVWBB Pro
    Join Date
    Apr 2014
    Location
    Montana, USA
    Posts
    552
    Quote Originally Posted by RKHanso View Post
    This may be answered somewhere else, but I can't find it.

    Is there a way to add threads to the smoker mount piece? (I don't see an individual picture of it in the list of pictures on Thingverse, but it is seen in the picture of the actual purple printed product, underneath the piece with the servo)
    I hoped it would come with 1" NPT threads to screw on a pipe, but it doesn't.

    I'm also guessing the opening of that piece in question - might be too large anyway, even if I could put 1" NPT threads in it.
    Just added a file with 1" NPT threads. The file name is Adapter_1inNPT. I printed one to verify and the fit is excellent.

  10. #220
    TVWBB Fan
    Join Date
    Oct 2015
    Location
    Minnesota
    Posts
    126
    Thanks. My brother will print it tonight.

Page 22 of 22 FirstFirst ... 12202122

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •