Search results

Bryan, Thank you very much for the help. I somehow missed that there was only 2.6v on the AVC pin. I jumpered it to another 3.3V pin and all is working perfectly now. Again thank you.

I bought this board quite a while ago and never got around to assembling it. I have assembled it and tried to flash it and continuously getting no communication with the heater meter reported. I have gone through every troubleshooting thread that I can find checked every voltage against the...

Hello Everyone, I just wanted to let everyone know I still have V3.1 boards avaliable. If anyone is interested just let me know and I will give you the info for my paypal. They are $10.00 including shipping. Hope everyone is having a happy holiday and a they have a great new year.

I am building the RF remote node on a V3.1 board. What needs to be populated on the board to get it to work. I assume the probe portions and the RF portions. Does the LCD stuff need to be populated?

On the V3.1 board what is the voltage from ground to the LCD backlight suppose to be? I am getting 2.5 volts. I do not have the LCD pull down resitors or the other resistor that can be put in to lower the voltage. I believe this is R7.

Ya I have been using version 23 but I like the new option in V1. that allows you to pick what programmer to use just by pressing the shift key before you hit upload.

I am trying to compile the heatermeter code using the new Arduino 1.0 software and it keeps giving me a bunch of crazy errors. Has anyone seen this or know a way round this so I can upload a sketch to my new V3.1 board.

Brian I have atleast 4 more boards avaliable right now. I also can not seem to find a switch for the reset switch. Everyone seems sold out at this time. Is there anyway to not install one on the V3.1 board and it still work?

I have some boards avaliable if anyone is interested in them. I will be selling them for $10 bucks shipped. Thanks

I have a WRT54Gl V1.o router that I bricked. I had linkmeter running on it and made a bone head mistake and uploaded the linkmeter.bin file from github. I can no longer access it and have tried all of the different debricking possibilities with the exception of jtag. Does anyone have any good...

This set up has worked perfect. I have done three briskets and a Ham and.it will hold within 2 degrees.

Has anyone ever ran into a problem when you plug a UNO into a computer it does not even recognize a usb device. It is powering the board and the blink sketch is working because the led is blinking like it is suppose to be. I can't seem to be able to load an other sketch on to it.

Here is a picture from the outside. I will have to wait for an inside picture because it is currently in use.

Well I got these little 3" stainless steel dog bowl dishes and used on on the inside as a deflector and the other on the outside. I used a bolt with a wing nut to hold then in place. I then punched a square hole in the outside one and used some High temp RTV to seal all the little gaps around...

Well hopefully they will get it fixed soon. I would like to say that I have a heatermeter finally working with a wishield and it is currently running my new WSM 18.5. This is going to be a great Thanksgiving.

OK I got V2 of the Linkmeter software installed correctly. I telneted in ans made the changes as stated in the bottom of the wiki for upgrading from v1 to v2. I am now trying to set a password and every time I input one it does not seem to want to take it and when I reboot the router and...

I have installed the V2 linkmeter software on my router. On the initial login I set the password. When I press save and update it just goes into saying waiting on router. Then when I reboot the router it acts like I never set the password. The next problem I am having is trying to figure out how...

OK I am trying to compile the Heatermeter software with Heatermeter Networking so that I can use a wishield and I keep getting this error. hmmenus.cpp: In function 'state_t menuNetworkInfo(button_t)': hmmenus.cpp:219: error: 'zg_get_rssi' was not declared in this scope I have no clue what to...

Here is the errors I get when I try to upload the R97 version of the heatermeter softwarefrom page one. avrdude: stk500_paged_write(): (a) protocol error, expect=0x14, resp=0x64 avrdude: failed to write flash memory, rc=-4 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51 Any...

I am having trouble uploading the heatermeter software to my Arduino Uno board. I am using the most updated version off of GitHub and it keeps giving me this error. hmmenus.cpp: In function 'state_t menuNetworkInfo(button_t)': hmmenus.cpp:219: error: 'zg_get_rssi' was not declared in this...