Quick partial disassembly of Weber genesis 1000


 
I bought the cheapest angle grinder from HF. at that time I know they didn’t have the 4 inch cup crimped. Come to think of it I don’t believe they had 3 inch either at my location. I’ll have to go back and take another look. Did Bruce buy up the 3 inch stock too? 😃
 
No, not me. They discontinued them at least a year ago. I have not used them nearly as much in the last 3-4 years since I started having my stuff sand blasted. But I use them occasionally these days. I have a surplus store in my area that carries some decent ones, but they are $6-7 each.
 
Ok just checking. 😀 is the sandblasting decision based on saving time and/or final finished surface. I assume both. I’m trying to justify if sandblasting. $80 an hour was what I was told. This seems to be the going rate I
In the Detroit area. How long does it take typically for the fire box and side panels to be sandblasted?
If the finished product is comparable to sandblasting with the extra time and effort of wire brushing, I’m leaning towards wire brushing.
Frankly, I have more time than money.
Thanks.
 
Ok just checking. 😀 is the sandblasting decision based on saving time and/or final finished surface. I assume both. I’m trying to justify if sandblasting. $80 an hour was what I was told. This seems to be the going rate I
In the Detroit area. How long does it take typically for the fire box and side panels to be sandblasted?
If the finished product is comparable to sandblasting with the extra time and effort of wire brushing, I’m leaning towards wire brushing.
Frankly, I have more time than money.
Thanks.
I doubt it would take more than an hour to sandblast a cook box and two end caps. If you could get a solid quote of $80-100 I think it would be well worth it to have it done. I can't find any place around me that will do it for less than $200 so I pretty much have to do the work myself even though I really don't like that aspect of restoring a grill.
 
Ok just checking. 😀 is the sandblasting decision based on saving time and/or final finished surface. I assume both. I’m trying to justify if sandblasting. $80 an hour was what I was told. This seems to be the going rate I
In the Detroit area. How long does it take typically for the fire box and side panels to be sandblasted?
If the finished product is comparable to sandblasting with the extra time and effort of wire brushing, I’m leaning towards wire brushing.
Frankly, I have more time than money.
Thanks.

I can totally understand the time/money thing. Obviously the less you spend the more profitable it is. But after wire brushing one out, and spending all that time, turning black with grime and soot, and smelling like a cookout even after a good shower just wasn't worth it to me. Especially with how amazing they look from the blaster.

Wire wheeled they for sure look crisp and clean and @Josh Dekubber is probably the king of cleaning a cookbox with wire wheels. His look amazing, but I still think the uniformity of the cook box being blasted inside, is a huge help in the sale.

That being said, I also think that the profile left on the aluminum after it is blasted, is more conducive to the painting process. The paint will stich better to a blasted surface that a wire wheeled surface.
 
I can totally understand the time/money thing. Obviously the less you spend the more profitable it is. But after wire brushing one out, and spending all that time, turning black with grime and soot, and smelling like a cookout even after a good shower just wasn't worth it to me. Especially with how amazing they look from the blaster.

Wire wheeled they for sure look crisp and clean and @Josh Dekubber is probably the king of cleaning a cookbox with wire wheels. His look amazing, but I still think the uniformity of the cook box being blasted inside, is a huge help in the sale.

That being said, I also think that the profile left on the aluminum after it is blasted, is more conducive to the painting process. The paint will stich better to a blasted surface that a wire wheeled surface.
 
Are you saying @Josh Dekubber permanently smells like a cookout?
Seriously, this will be my personal grill. Learning along the way to maybe flip a few a year but don’t know enough yet. As we all know, this hobby can get to be a little expensive if we don’t watch ourselves.

I have not met Josh, so I am not sure. But he seems to love doing it. Even with a good respirator on, I feel like I can smell grill smell for a while after doing it, even post shower.

The only time it gets expensive to me is when that Parts Deals thread starts lighting up. I have gotten to the point that unless it is blue, anything more than $10-20 is my limit. Given, if I see one that in pictures I can tell may be worth a little more, I may go a little higher, but anything free I will take. I have a huge array of good parts, even if you end up tossing everything except a good drip pan, or control panel.
 
It's not about the money for me. It's about doing my own work on my restoration. If I could do my own blasting and or powder coating I definitely would go that route. On the other hand in my opinion I don't feel like my methods are inferior. Maybe harder and more time consuming but those kinds of things build appreciation for my accomplishments. Compared to what I do for a living Grill restoration is relaxing and restful. I'm also not in a hurry when it comes to my personal grills. I get done whatever I get done and don't cut corners imo. I enjoy the meticulous side projects involved.

Yes Cody it's true I do enjoy it. Every bit of it.
 
It's not about the money for me. It's about doing my own work on my restoration. If I could do my own blasting and or powder coating I definitely would go that route. On the other hand in my opinion I don't feel like my methods are inferior. Maybe harder and more time consuming but those kinds of things build appreciation for my accomplishments. Compared to what I do for a living Grill restoration is relaxing and restful. I'm also not in a hurry when it comes to my personal grills. I get done whatever I get done and don't cut corners imo. I enjoy the meticulous side projects involved.

Yes Cody it's true I do enjoy it. Every bit of it.

To be clear, I don’t think anything you do is inferior, in case what I stated sounded as such. I don’t have the patience to make a cookbox look like you do! So it was 100% complimentary!
 
To be clear, I don’t think anything you do is inferior, in case what I stated sounded as such. I don’t have the patience to make a cookbox look like you do! So it was 100% complimentary!
I didn't think you were saying anything bad about the way I do things. I'm at work and in a rush and sorry if I came across in a bad way. I think that the fantastic work that you do and others that have cook boxes blasted looks fantastic! I'm honored to be a part of this group and I always enjoy seeing other people's work and their methods and their favorite grills etc...
 
It's not about the money for me. It's about doing my own work on my restoration. If I could do my own blasting and or powder coating I definitely would go that route. On the other hand in my opinion I don't feel like my methods are inferior. Maybe harder and more time consuming but those kinds of things build appreciation for my accomplishments. Compared to what I do for a living Grill restoration is relaxing and restful. I'm also not in a hurry when it comes to my personal grills. I get done whatever I get done and don't cut corners imo. I enjoy the meticulous side projects involved.

Yes Cody it's true I do enjoy it. Every bit of it.
I’m with you, Josh. I enjoy being meticulous with projects on my own timeline. Once I get done I can sit back and say I did the best with my ability. I can be honest with myself and know I didn’t cut any corners.
I think you convince me to skip the sandblasting and use the wire brush. I may smell like a cookout but some women like that. 😀 Plus sandblasting may be a little out of budget for now. I really do appreciate everyone’s support and willingness to share ideas and know how.
 
Lot of great ideas from a lot of great Grill experts here.
A lot of times there's multiple ideas by multiple people that all work really well it just comes down to preference.
Just for reference I use DeWalt XR impact gun with Ryobi wire wheel attachments. I've done more grills than I can count with this method.
Screenshot_20250731_111757_Photos.jpgScreenshot_20250731_154203_Photos.jpgScreenshot_20250731_112401_Photos.jpgScreenshot_20250731_153805_Photos.jpgScreenshot_20250731_154238_Photos.jpg
 

 

Back
Top