Out of round WSM

[J Bowie]

I dropped my center section while installing wheels to unit. Lid now fits differently. I measured it and it's about 3/16 inch out of round. I saw somewhere how to straighten this. HELP

 

[James N]

You need to give it a little bear hug, But don't use much pressure cause it doesn't take much then measure it again

 

[J Bowie]

I may need to give a BIG BEAR HUG, this is the 22.5.
Thanks Ill give it a try.

 

[timothy]

Do you have a ratchet strap? If so place the business end over the high spot with a wood shim under it and give it a few clicks till it reads true.

Tim

 

[Dwain Pannell]

Here's some info: http://www.virtualweberbullet.com/partstrouble.html#middle

 

[Dustin Dorsey]

The bear hug method worked for me. You just have to be very gentle and go a little bit at a time.

 

[THoey]

Oh, and don't wear a nice shirt if the WSM is seasoned. Don't ask me how I know...

 

[Chad Bman]

I "bear hug" every kettle/WSM I pick up without a second thought.