What about putting it on the bottom of the cylinder? Or is that to close to the coals?I would absolutely put it on the door itself. It's a much cleaner look. I wouldn't put it on the bottom, just along the top and sides. If you put it on the cylinder you'll have a nasty dirty white exposed section of gasket.
Yes, im talking about between the bottom section and the center section.You mean between the bottom section and center section? You can do it but it might be a tight fit at first. I wouldnt put it on the bottom of the door because it tucks into the center section and that's usually a pretty tight fit. You MIGHT get a slight leak at the corners but it's super minimal.
I installed this gasket setup on my 22 with the Cajun bandit door. I didn’t run any of the gasket between the middle and bottom section (no smoke leaked out from that section my first couple of uses).So, im going to install a lavalock gasket on my 22” wsm before I use it. Question I have is have any of you guys installed it on the cajuin bandit door? If so should I mount the gasket on the door or the cylinder?
thanks!