• Enter the TVWB 27th Anniversary Prize Drawing for a chance to win a Weber Traveler Portable Gas Grill! Click here to enter!

How Close to "Vertical"???


 
J

JimT

TVWBB Pro
Does it really matter if the WSM is perfectly "vertical?" How much "tilt" is acceptable?

For instance, I've got a cement slab behind my garage that is sloped for drainage. I've been cooking there, but have been shimming the two "downhill" legs of the WSM about a quarter inch to make it plum. Is this necessary? (My guess would be no.)

How about when you are camping or at a competition? How fussy do you get about whether it is straight or not?

Thanks for your thoughts,

JimT
 
If Spring ever arrives you could frame a space and pour a level pad just about the size of your smoker. You would be able to keep most of your drainage that way. It would make it easier to cook on a level surface.
 
I'd want mine straight and sturdy (stable). If I didn't have a level surface, I would make something. The thought of fire, grease, possibly water and a large piece of meat on a tilt sounds like trouble waiting to happen.
 
Quarter of an inch? I wouldn't be too worried about that small amount.

Bill
wsmsmile8gm.gif
 
I've had the same question. My back porch is pressed concrete and is slightly sloped for proper drainage.

What I have done is used a thin piece of wood (it's actually a cedar plank for grilling a salmon fillet) under one of the legs and that keeps the WSM almost perfectly level.

I started doing this when I was cooking with water and was scared of possible spillage. I have graduated to the clay saucer now so it may not really make any difference.
 
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Lee Morris:
I've had the same question. My back porch is pressed concrete and is slightly sloped for proper drainage.

What I have done is used a thin piece of wood (it's actually a cedar plank for grilling a salmon fillet) under one of the legs and that keeps the WSM almost perfectly level.

I started doing this when I was cooking with water and was scared of possible spillage. I have graduated to the clay saucer now so it may not really make any difference. </div></BLOCKQUOTE>

Exactly the same here, I used to shim the legs to level my WSM so that the water pan had maximum capacity. Now that I have a Stoker and cook with a dry pan I no longer worry.
 
If you have a fixed location that you like, just pick up a large concrete paver, many sizes and styles to choose from. Shim up the low side with a couple of cedar shims, score with a utility knife and snap off flush with the edge of your paver.Use a exterior grade caulk, and seal all four sides.
 
When you're using water in the pan, level is somewhat important. Depending on whether I use my patio (level) or a poured concrete pad (sloped away from the house) outside my side garage door, I have a scrap of pressure treated 2x6 that's roughly the size and shape of a doorstop. I position the bowl with two legs equidistant from the house wall, and adjust the "doorstop" under the third leg to level it out.
 
You must log in or register to reply here.

 

Back
Top