I am really slow about understanding the settings on the "Configuration" page. My setup is fine and working like a champ out of the box so to speak with my Kamado Joe Classic II..
But what I want to do is have the fan come on ONLY after the servo opens the vent to about 75%... then have full fan output ramp up from there to 100% fan at 100% servo vent.
Can someone give me a bit of instructions as to what numbers go in what box?
This forum really sucks as the home-base for the Heatermeter because of the "No attachments Allowed" policy, apparently dating from the 80's, or I would post a screenshot of my current setup. Or someone could post a photo of what the settings need to be.
Tom
But what I want to do is have the fan come on ONLY after the servo opens the vent to about 75%... then have full fan output ramp up from there to 100% fan at 100% servo vent.
Can someone give me a bit of instructions as to what numbers go in what box?
This forum really sucks as the home-base for the Heatermeter because of the "No attachments Allowed" policy, apparently dating from the 80's, or I would post a screenshot of my current setup. Or someone could post a photo of what the settings need to be.

Tom