Another 56" Vieluxe Restore


 
Jon Tofte said:
My spit is 3/8” in diameter and drops down to 1/4” at the point where it goes in to the motor. It is approximately 46” long and is clearly original.

It sounds like you have the motor part solved. Mine will arrive from an eBay seller soon.
Click to expand...
My Vieluxe spit is 3/8” square throughout its length and tapers to 5/16” square at the tip that engages into the motor drive
 
R Chin said:
And if it’s like mine, the smoke burner and igniter were fully intact if extra heat or flavor needed
Click to expand...
Fortunately, the smoker box burner seems to be the only one that escaped the doom the others suffered due to two decades of overwhelming neglect. It probably wasn’t used that much, and the smoker box helped shield it.
 
If need be Jon IIRC the burners can sub'd with 1st gen Summit burners. IIRC the fireboxes were made with the same "geometry". But Ray may be able to enlighten further on it
 
LMichaels said:
If need be Jon IIRC the burners can sub'd with 1st gen Summit burners. IIRC the fireboxes were made with the same "geometry". But Ray may be able to enlighten further on it
Click to expand...
The OG summit burners will be 0.5in shorter and the flame will start very close to the front panel of the cook box - but it really is the only option if you can’t salvage the Vieluxe burners

I would probably consider welding closed the first few orifices to keep the flames off the front panel

Can’t recall where the ports for the igniter shoot relative to the front panel though…
 
R Chin said:
The OG summit burners will be 0.5in shorter and the flame will start very close to the front panel of the cook box - but it really is the only option if you can’t salvage the Vieluxe burners

I would probably consider welding closed the first few orifices to keep the flames off the front panel

Can’t recall where the ports for the igniter shoot relative to the front panel though…
Click to expand...
How about late model Genesis burners? They might be closer in length but I've never looked at one so IDK how they fasten internally
 
Made a little more progress last night…found this igniter kit on Amazon, and turns out the module is almost an exact copy of the original ones on the Vieluxe! I plugged one in real quick last night and got spark at the igniter. Unfortunately, I can’t find the module by itself, so had to buy 2 whole kits, but seems like it’s going to work!

Amazon.com : Meyffon 42325 Grill Igniter Kit Compatible with Weber Summit Gold/Platinum B6 6 Burner Gas Grills Models 2000-2006 Ignition Kit Electrodes w/Wire Spark Generator Push Button Screws : Patio, Lawn & Garden

Amazon.com : Meyffon 42325 Grill Igniter Kit Compatible with Weber Summit Gold/Platinum B6 6 Burner Gas Grills Models 2000-2006 Ignition Kit Electrodes w/Wire Spark Generator Push Button Screws : Patio, Lawn & Garden
www.amazon.com
 

Attachments

  • IMG_7575.jpeg
    IMG_7575.jpeg
    200.5 KB · Views: 2
  • IMG_7576.jpeg
    IMG_7576.jpeg
    171.5 KB · Views: 2
You must log in or register to reply here.

 

Back
Top