alternative to high temp tape

[Noah.Huffmaster]

I picked up an atc a couple weeks ago. I have found that i like piece of mind over long, overnight cooks, but I just don't need it on short cooks. I am wondering is there a plug or cap that can be put over the bottom vents instead of removing and reapplying high temp tape every time I remove and I reinstall the atc? Any and all ideas or suggestions will be appreciated.

 

[NGillette]

There is. I used electrical knock out plugs from home depot. Here is the ink: http://www.homedepot.com/p/Halex-1-2-in-Knock-Out-Seals-4-Pack-26071/100191724

I do however forget the size I ended up buying, they have four or five different sizes.

 

[Dwain Pannell]

Though I don't use an ATC, those plugs seem to be the best answer.

 

[Mike Leiter]

For the 18 and 22s the plug sizing are as follows: For the 14 version I`m not sure of the exact size..

Everbilt-3/4" -in-Nickel-Plated-Steel-Hole-Plug-13118/202209533 are the ones at Home Depot and run about $1.70 each
Mcmaster-carr.-----Push-in Metal Plug, Nickel-Plated, Fits 3/4" ID, 59/64" Head Diameter

I used the McMaster-Carr and they fit great.

 

[Noah.Huffmaster]

Thanks yall heading yo HD now. Got to re - up on charcoal any how.