Steve_M
TVWBB Guru
I'm pretty sure this will work, I'm just looking for someone else to bounce this off of.
Rather than using a 12v blower, I'm going to be using an SSR which can be run at 5v. So rather than do 12v > 5v > 3.3v on the HM, I'm just going to power it with beefy 5v PSU for the HM and RasPi and let the IC4 3.3v regulator power the arduino.
From what I can tell, if I jumper the the 5v rail to the 12v rail, I should get 5v out of the blower circuit in pulse mode.
Correct?
Rather than using a 12v blower, I'm going to be using an SSR which can be run at 5v. So rather than do 12v > 5v > 3.3v on the HM, I'm just going to power it with beefy 5v PSU for the HM and RasPi and let the IC4 3.3v regulator power the arduino.
From what I can tell, if I jumper the the 5v rail to the 12v rail, I should get 5v out of the blower circuit in pulse mode.
Correct?