14.5" Setup With Photo

When I was thinking about getting the 14.5 I looked at how others set up to use theirs. I had a plywood top with a piece of 1X4 on the bottom to clamp in a B&D Workmate as a work table. I got 4 galvanized floor flanges and screwed them into 4 blocks that I glued to the underside so I could use 1.5" screws I had. I then cut 2 three foot pieces of galvanized pipe I had in half. Both ends of the original were threaded so now I had four 18" legs. I don't use any more space in the garage and I screw on the legs when I want to set up.

I had a piece of sheet metal and the heat shield to keep the heat off the plywood. Nothing fancy or earth shaking but it does the job and the WSM is at a great height with work space on the table top.

I'm still figuring out google photos so I hope this works.

NEW LINK SHOULD WORK Sorry about that.
https://photos.app.goo.gl/kdvIEG7QQytzUV9e2

Lew, I'm afraid it did not, we can't see your photos. You can test it yourself copying your link and checking it in a new window started in private mode in your browser.

Thanks Kristoff. This should work.

I see it, and a good functional idea !

Tim

Nice work station.