Hello all,
thanks for you help.
I spent about 6 hours and got my silver c looking pretty good.
Sorry but the links will not post to pics.
I used the lid and fire box from a donor along with the left hand tables.
I painted my frame and the donor fire box and end caps.
Replaced with the rc stainless flavor bars and new burners.
I need a new grate.. but used my cleaned up stainless ones with spirit cast iron grates for now.
Started with the old C
https://goo.gl/photos/TtZHPVUfxN3xGvcS7
Cleaned and wire brushed and took a left side section of frame from the donor
https://goo.gl/photos/xotFWp9mZC2sci2g9
Never going to get this stuff back together
https://goo.gl/photos/kBBbFPHCwKC76JYP7
Well maybe... new burners in
https://goo.gl/photos/z2guMbBEBXCLR2M87
cleaned it up
https://goo.gl/photos/f7a4NdTfMSihb5ov5
side plate in
https://goo.gl/photos/AY3wHWT3vB3yvqvx7
Have to add the lid now after it is cleaned and assembled
https://goo.gl/photos/9pMnPmvQNuioXPrE7
Lid on
https://goo.gl/photos/cRUvtFQ5aDKaUCUQA
Lid is like black glass with lint on it
https://goo.gl/photos/Lkx5BwDwu6vJoGgm9
Ready for ignition
https://goo.gl/photos/66zDuxpP17ARXhUM9
Test successful
https://goo.gl/photos/vjfkGdkg83Z4fhb97
thanks for everyone who helped with this build.
The only thing I need to do is polish it up a bit more and replace the rear tires and axle with the nicer ones from the donor.
Of course I want a right side table as well
thanks Kevin
thanks for you help.
I spent about 6 hours and got my silver c looking pretty good.
Sorry but the links will not post to pics.
I used the lid and fire box from a donor along with the left hand tables.
I painted my frame and the donor fire box and end caps.
Replaced with the rc stainless flavor bars and new burners.
I need a new grate.. but used my cleaned up stainless ones with spirit cast iron grates for now.
Started with the old C
https://goo.gl/photos/TtZHPVUfxN3xGvcS7
Cleaned and wire brushed and took a left side section of frame from the donor
https://goo.gl/photos/xotFWp9mZC2sci2g9
Never going to get this stuff back together
https://goo.gl/photos/kBBbFPHCwKC76JYP7
Well maybe... new burners in
https://goo.gl/photos/z2guMbBEBXCLR2M87
cleaned it up
https://goo.gl/photos/f7a4NdTfMSihb5ov5
side plate in
https://goo.gl/photos/AY3wHWT3vB3yvqvx7
Have to add the lid now after it is cleaned and assembled
https://goo.gl/photos/9pMnPmvQNuioXPrE7
Lid on
https://goo.gl/photos/cRUvtFQ5aDKaUCUQA
Lid is like black glass with lint on it
https://goo.gl/photos/Lkx5BwDwu6vJoGgm9
Ready for ignition
https://goo.gl/photos/66zDuxpP17ARXhUM9
Test successful
https://goo.gl/photos/vjfkGdkg83Z4fhb97
thanks for everyone who helped with this build.
The only thing I need to do is polish it up a bit more and replace the rear tires and axle with the nicer ones from the donor.
Of course I want a right side table as well
thanks Kevin