Bob Ivey
TVWBB Emerald Member
Ok so I fired up build and no display. Tried the variable pot but did not work. So I decided to log onto the rpi in stand alone to see if that told me anything. Disconnected hm4 from rpi and hooked up to a switch with a laptop with proper ip address. Was able to log on to the rpi at 192.168.200.1 then reset network on rpi to dhcp and assigned the rpi mac address to an assigned ip of 192.168.2.165. Connected rpi to my main network and tried to ping that ip. No joy. then hooked up rpi to temp switch and laptop and tried to login to the default rpi address of 192.168.200.2. Again no joy. What is required to restore the rpi network to default setting of 192.168.200.1. Once that is done, is there a trick to assign the rpi to my main network.
TIA
TIA