One Grill.Com Spit Rod


 

Richard Garcia

TVWBB All-Star
Last year I purchased a Cajun Bandit Rotisserie Kit that is fitted with a crome plated 5/16" Square Spit Rod in which the Cajun Bandit Folks purchase from OneGrill.Com. I am now wanting to purchase a Stainless Steel Spit rod, however, none produced at 5/16" size; So, they do have a 1/2" Stainless Steel Hexagon Spit Rod but not sure that it will fit through the hole on the Cajun Bandit Ring to insert into the Rotisserie Motor. So, will appreciate any comments from you Cajun Bandit Rotisserie Experts on this matter.

Oh, I did call Chris of Cajun Bandit who told me it will be a very tight fit.
 
OneGrill does have a 1/2” stainless steel spit rods with 5/16” square drive and it will fit into the roti motor. The issue might be the shaft collar.

I own a 5/16” square spit rod and 1/2” hex spit rod from OneGrill. The end on the 1/2” hex has 5/16” square drive.

A new shaft collar will be require to fit the 1/2” hex. You’ll have modify the SS ring to accept the larger diameter collar shoulder.

I measured both collars and SS ring with calipers this morning.
 

Attachments

  • CE7CB1FA-ECBB-4087-87A6-9FB9980CA1A4.jpeg
    CE7CB1FA-ECBB-4087-87A6-9FB9980CA1A4.jpeg
    109.3 KB · Views: 3
  • 2A56E03D-E737-45E7-8D5E-7F7D39373DF0.jpeg
    2A56E03D-E737-45E7-8D5E-7F7D39373DF0.jpeg
    140.9 KB · Views: 3
  • 484B61EF-04FD-4F74-916B-593C6CAE7F06.jpeg
    484B61EF-04FD-4F74-916B-593C6CAE7F06.jpeg
    92.8 KB · Views: 2
  • CA16A3C8-7350-443B-BC90-68BDAE367C63.jpeg
    CA16A3C8-7350-443B-BC90-68BDAE367C63.jpeg
    49.8 KB · Views: 2
  • F847C663-C295-4564-8F0F-3DEDBCF7F52B.jpeg
    F847C663-C295-4564-8F0F-3DEDBCF7F52B.jpeg
    47.3 KB · Views: 2
  • 2DF30996-B2A2-4365-BFAC-1911A619B548.jpeg
    2DF30996-B2A2-4365-BFAC-1911A619B548.jpeg
    57.2 KB · Views: 2
  • 9CF337A3-8EF3-4568-9758-260A617EC8C4.jpeg
    9CF337A3-8EF3-4568-9758-260A617EC8C4.jpeg
    73.5 KB · Views: 3
OneGrill does have a 1/2” stainless steel spit rods with 5/16” square drive and it will fit into the roti motor. The issue might be the shaft collar.

I own a 5/16” square spit rod and 1/2” hex spit rod from OneGrill. The end on the 1/2” hex has 5/16” square drive.

A new shaft collar will be require to fit the 1/2” hex. You’ll have modify the SS ring to accept the larger diameter collar shoulder.

I measured both collars and SS ring with calipers this morning.
Thanx for your reply and advice!
 

 

Back
Top