NG Manifold for Genesis 1000


 
DuncanMcDowell

DuncanMcDowell

New member
Hey folks, did some searching and feel like I have a good handle on this, but would like confirmation if possible.

I've recently acquired what I believe to be a '99 (serial number code begins with 'EE') Genesis 1000 (model# 210000). It's setup for LP but if possible I'd like to acquire an NG manifold to properly convert. I believe the part number I'm looking for is 56039. These are getting harder to find, but it would appear there's a source I can find in Canada to supply one.

Anyone able to confirm that is indeed the correct part number? Anything else I should consider - specifically around the ideal set up for an NG line w/ quick-connect?

In an ideal world I would found a grill that was already NG but I've been searching for 6 months and have only seen two grills show up, both being propane.
 
I have 3 NG valves that you can just swap on your original manifold. That is what I did, and why I have these. I would be glad to do a swap and if you include the regulator, I will include a quick connect hose. PM me if you would like to swap. Shoot...Sorry these where from a Silver. Never mind
 

Attachments

  • 20210618_203307.jpg
    20210618_203307.jpg
    74.7 KB · Views: 7
  • 20210618_203315.jpg
    20210618_203315.jpg
    68.3 KB · Views: 7
  • 20210618_203320.jpg
    20210618_203320.jpg
    66.8 KB · Views: 4
  • 20210716_220154.jpg
    20210716_220154.jpg
    119.2 KB · Views: 4
  • 20210716_220206.jpg
    20210716_220206.jpg
    85 KB · Views: 7
Last edited:
I've ordered the part, or at least attempted to. They claim a 2-3 week lead time. Will update this thread as I'm skeptical the order will be fulfilled.
 
Yikes, that is pretty steep and from Canada. I suppose shipping was killer too.
If that falls through, PM me and I will check to see if I might have a NF manifold for a Genesis 1000.
Bruce
 
Bruce said:
Yikes, that is pretty steep and from Canada. I suppose shipping was killer too.
If that falls through, PM me and I will check to see if I might have a NF manifold for a Genesis 1000.
Bruce
Click to expand...

Thanks, Bruce - much appreciated. I'm actually in Canada so shipping is free :). Will send you a PM if the order cannot be fulfilled.
 
Bruce said:
Yikes, that is pretty steep and from Canada. I suppose shipping was killer too.
If that falls through, PM me and I will check to see if I might have a NF manifold for a Genesis 1000.
Bruce
Click to expand...
I am also looking for an NG manifold for the Genesis x000 series.
 
You must log in or register to reply here.

 

Back
Top