DominicCyr
New member
Hi!
Sorry if some sentences are not grammatically correct but english is not my first language.
So... my name is Dominic and I live in Port-Cartier, a small town on the north shore of the St-Lawrence river in Quebec, canada
It's my first attemptto build the HM and i've made a mistake when assembling it. And there are few issues that we probably can figure it out, with your help.
It's a 4.3 with a RPi 2B + thermocouple
First issue is that the LCD dimmer is VERY sensitive... I see black or nothing within 1°.
Second, the first probe indicate +-400°F without K probe in it
And my mistake was to plug the LCD board upside down in the base board (the two 5 pins connector).
I've fried something and I hope we can figure it out what is burned with some test.
Since, the red led flash once when powering up and the LCD show black block on the top line
For this summer, the next steps are to find someone local (or in canada) to print me something to build a rotodamper for a little smokehouse and the SSR for the sous-vide
The pictures were after my mistake
*
Sorry if some sentences are not grammatically correct but english is not my first language.
So... my name is Dominic and I live in Port-Cartier, a small town on the north shore of the St-Lawrence river in Quebec, canada
It's my first attemptto build the HM and i've made a mistake when assembling it. And there are few issues that we probably can figure it out, with your help.
It's a 4.3 with a RPi 2B + thermocouple
First issue is that the LCD dimmer is VERY sensitive... I see black or nothing within 1°.
Second, the first probe indicate +-400°F without K probe in it
And my mistake was to plug the LCD board upside down in the base board (the two 5 pins connector).
I've fried something and I hope we can figure it out what is burned with some test.
Since, the red led flash once when powering up and the LCD show black block on the top line
For this summer, the next steps are to find someone local (or in canada) to print me something to build a rotodamper for a little smokehouse and the SSR for the sous-vide
The pictures were after my mistake


*


