Looking for model number


 
I think those are lot/batch numbers. That ring to the left of them is a casting with a date code in it. If you took a better pic of that we may be able to figure it out the month/year is was casted.
 
View attachment 113888
So the platinum grill sold before I had a chance to buy it. But I found this one for $10. Am i ok just using a y-split hose off the regulator to hook up to side burner.
In my experience. The vast majority of Genesis 1000-5000 manifolds all came with an extra port built in. They just installed a plug if it was unused for the particular grill model it was being used. If so, it is simply a matter of removing the plug and installing the needed connections for the side burner.
 
I just stripped the first grill that I posted down to the frame, there is hardly any rust on it. I'm so happy. This is probably the best frame I ever had without doing anything to it.
What condition was the left crossmember on the side of the cook box? Were you able to remove the cook box mounting bolt without issue?
 
In my experience. The vast majority of Genesis 1000-5000 manifolds all came with an extra port built in. They just installed a plug if it was unused for the particular grill model it was being used. If so, it is simply a matter of removing the plug and installing the needed connections for the side burner.
I got the second d grill for $10. It has the port for a side burner.
 
What condition was the left crossmember on the side of the cook box? Were you able to remove the cook box mounting bolt without issue?
The bolt snapped on both grills, but there was no damage to the frame or firebox The first grill has absolutely no rust where the boat goes through and connects to the firebox. The second one had a little bit of surface rust but still better than any rehab I've ever done on a silver . This is my first rehab that isn't a silver b or c
 

 

Back
Top