How can I get this back in the hole?


 
John-NY

John-NY

TVWBB Pro
Not a big deal really if it doesn’t work out, but this threaded insert pulled out of its hole.

I tried putting a block of wood against it and pounding with a hammer but no luck and nothing budged.

Anyone far smarter than me have any good ideas?

IMG_7674.jpegIMG_7675.jpegIMG_7676.jpegIMG_7677.jpegIMG_7678.jpeg
 
I hate when that happens. Try this. Pound it flat with a small machinist hammer (like a small VERY small) ball peen. Then get yourself a pop rivet gun and some "captive nuts" that work with it. I think that will fix you right up!
 
Put a small socket on the back side, use a small C clamp to push it out. Liberal use of heat and or penetrant will help. But if you don't want to crack it support it. An old mechanic talkin here and speaking from MANY years of experience doing this
 
Thanks, I tried searching the forums first but failed, but now that you said C Clamp it jogged my memory. Using “clamp” in the search I found this thread I was looking for:

S

Thread 'Genesis Hinge Pin Snapped and Stuck'

Hello! I have a Genesis with a snapped hinge pin. I’ve been hitting it with PB Blaster but just wondering if anyone had any other advice. I don’t have access to a lot of tools.

Thanks!IMG_2339.jpegIMG_2338.jpegIMG_2337.jpeg
 
You must log in or register to reply here.

 

Back
Top