Kyle Stierwalt
New member
Hey everyone,
Have a question about my HeaterMeter 3.2 /Linksys WRT54GL controller. Just booted this system for the first time since 2012 and it fired up with no problem. Took some tinkering to get the root password reset, and to get it back on my local network, but all is fine.
I'm assuming the openwrt Linkmeter software and AVR software are both out of date.
Question.
(1) Anyone know how I can tell which versions I'm running on both? (2) And, what are the latest versions of both for my hardware?
Thanks,
Kyle
AVR = Atmel ATMega328P-PU 1218
Router = WRT54GL (I think)
PS Here's the url for the openwrt/root password reset, with one BIG caveat, you'll telnet to 192.168.200.1 https://martink.net/2014/04/02/how-to-reset-openwrt-root-password/
Have a question about my HeaterMeter 3.2 /Linksys WRT54GL controller. Just booted this system for the first time since 2012 and it fired up with no problem. Took some tinkering to get the root password reset, and to get it back on my local network, but all is fine.
I'm assuming the openwrt Linkmeter software and AVR software are both out of date.
Question.
(1) Anyone know how I can tell which versions I'm running on both? (2) And, what are the latest versions of both for my hardware?
Thanks,
Kyle
AVR = Atmel ATMega328P-PU 1218
Router = WRT54GL (I think)
PS Here's the url for the openwrt/root password reset, with one BIG caveat, you'll telnet to 192.168.200.1 https://martink.net/2014/04/02/how-to-reset-openwrt-root-password/