Help

[Scott-CA]

Hello I'm Scott from Salinas,ca
I just was givin a Weber S670, I need to convert it from NG to LP are there videos or instructions to do this. Weber Co. Does not help with this convention because of liability reasons. Would appreciate any advise
Thanks

 

[Bob Sample]

Lp orifices are smaller so you need to change the orifice size and get a lp hose and regulater. Not sure if you can swap out the orifice but you can fill it in using the proper sized orifice drill bit and some silver solder but I didn't tell you that.

 

[Bob Sample]

Here is a sizing chart
http://www.hvacredu.net/gas-codes/module2/Gas Orifice Capacity Chart.pdf

Take the total input and divide by the number of burners to get the proper btu's/ burner.

Welcome to the forum.

 

[Pete in PG]

Hey Scott!! Welcome to the forum and we're neighbors! Good luck with the conversion; I really don't have any advice in that regard.

 

[Bob Mann]

Hi Scott and welcome aboard!

 

[Tony R]

Welcome home Scott.

 

[Chris Allingham]

This is the thread I had suggested to you in our email exchange:

Convert grill from NG to LP

I did a quick search on YouTube and don't find a video on how to do this for the S670.

 

[Mike Coffman]

Welcome aboard Scott and good luck on your conversion!

 

[Paul Kastner]

Good luck with your conversion and welcome to the site.

 

[Troy Lew]

Welcome Scott, if your a little shaky on your conversion you might consult a plumber.