The Durawood on a grill I'm trying to clean up has indents in it where somebody placed something hot. I think maybe the end of a rotisserie. There are a lot of them. I wouldn't mind flipping the Durawood slats over, but what would I do about the screw holes? Has anybody done this?
Durawood
- Thread starter KennP
- Start date
Bruce
TVWBB 2-Star Olympian
Kenn: Those slats are pretty durable, but once they get melted or deformed, they are pretty much done for.
But, if you want to try to clean up the melted areas. I suggest you grab a couple ounces of straight bleach and dab a little into those areas. Keep doing it to keep the areas wet. After about 5 or 10 minutes, you should grab a small wire brush or a green scrubby or even some fine steel wool and go after it.
Since you are working with bleach, take all precautions to protect your clothes, eyes, skin, etc....
But, if you want to try to clean up the melted areas. I suggest you grab a couple ounces of straight bleach and dab a little into those areas. Keep doing it to keep the areas wet. After about 5 or 10 minutes, you should grab a small wire brush or a green scrubby or even some fine steel wool and go after it.
Since you are working with bleach, take all precautions to protect your clothes, eyes, skin, etc....
