heatermeter


 
  1. D

    Heatermeter troubles - No Communication after a while on hot days

    Since I built my Heatermeter a couple of years ago, it works like a champ whenever I use it on a chilly day. I even used it for a week straight in the fall last year to make sure some concrete I poured was staying warm enough and it never choked. Now that it's getting to be summer again...
  2. D

    Airburner - HeaterMeter Success!

    Longtime lurker here (this may be my first forum post ever). But I got excited and had to post after finally fixing my temperature problems. The answer, in short - MAKE AN AIR BURNER! I had previously been using a cat dish with a hole drilled in it for a 1 inch pipe and held it to the WSM with...
  3. M

    Google Home Display or Google Assistant Integration

    Apologies if this has been covered. I did a quick search and didn't come up with anything. I have a Google Home display in my kitchen and every time I'm doing a cook I think it would be great if I could see the Heatermeter status on the display. I have no idea how difficult it would be but is...
  4. C

    Gaps in chart?

    Been a few months since I’ve been able to run the smoker, but set things up last night to run a small catering job I have today for a Christmas party. Everything seems to be working fine in that the controller is keeping the pit temp right and running the blower, but there are now gaps in the...
  5. J

    Battery-Operated HeaterMeter Finished!

    Hey guys, finally got this all-in-one battery powered HM up and working. Thanks to Tom Cole for the design of the case, which I blatantly ripped-off for my own design. I know the printing of my case isn't great and the printer will need more adjustments. Everything fit, so it wasn't a big deal...
  6. J

    FYI - MicroDamper + 22"WSM + HeaterMeter + AirBurner = Fail

    Greetings All, TLDR; The MicroDamper fan can't flow enough air through the bends on the Air Burner so use the blower provided in the HeaterMeter Kit. Got fancy and figured, why not use the MicroDamper. Foolish move. This configuration had literally zero effect on the grill temp. Had I known, I...
  7. P

    HeaterMeter Variant

    First, Bryan, thank you, thank you, thank you for creating the HeaterMeter! Your work is amazing!!! I have a few questions: 1. I was thinking, wouldn't it be nice if the HM could control 2 smokers, 2 sous vide machines, or 1 of each?! I was looking at the schematic for 4.3 and see pin 13 isn't...
  8. L

    PID values for Weber Smokey Mountain 18' (47cm)

    Hi Guys, does someone have PID values set for WSM 18' (47cm)? I'm using adapt-a-damper if it may matters Tnx a lot L.
  9. T

    Anyone modified HM 4.3 case for Pi Zero?

    My gorgeous HM 4.3 case, printed by the esteemed Mr. Mayland, was perfect when I was rocking a Pi 2 / 3... But now that I'm using a Pi Zero W, those open holes on the left are just begging for bugs to crawl in and wreak havoc. Just wondering if any other perfectionists had modified the case...
  10. M

    Wireless Probes

    When going through the config section, I got the feeling that there was a possibility of adding a wireless probe, be it either meat or pit. Unfortunately, I couldn't find much documentation about wireless probes out there. I think the wireless probes may be fun to experiment with instead of...
  11. J

    UDS Build with a Heatermeter

    Does anyone have any pictures or directions on how they connected their heatermeter to a UDS? I am looking to plan out my UDS build and want to use my heatermeter for the airflow, instead of the normal method. i tried searching the forum but didn't find any topics. Please feel free to direct me...
  12. M

    HeaterMeter Alexa Skill

    Hello fellow bbq and tech fans. I've created my first Alexa skill and thought some of you might be interested. It's a simple skill that integrates with your HeaterMeter. There's not a lot to it, but you ask things like "What's the pit temp", "Change set point to 350 degrees", or "What's the...
  13. D

    Maverik ET-72/73 and ET-722/733 difference & thermistor data sheet

    Hi according to heatermeter wiki the standard probe is a 10K NTC thermistor and is highly commended to use ET-72/73 but also ET 732/733 are acceptable I have sourced on Amazon some Maverik compatible thermistor with ET-732/733 (below the link ) and works fine with that thermometer but if I...
  14. B

    New from MN

    Hi All!!! My name is Bryon and I'm freezing in MN. I have built myself an Ugly Drum smoker and loving it. I am currently building a Heatemeter for the Ugly. I've run into a problem. Only my Green and Yellow lights will turn on and nothing shows on display. I will be heading to the correct...
  15. P

    New HeaterMeter "not communicating"

    Hi, Myself and a friend built HeaterMeters the other night. As far as I'm aware we both did the exact same thing - except his works and mine doesn't! It works independently - the screen reads the pit temp and the blower comes on, it's just the network side of thing that's not behaving. When I...
  16. T

    Heatermeter 4.0 Weather Resistant custom enclosure

    Ready for service in the new case, just need to seal up the PID jack and lid seal. I'll keep it powered up today for anyone wants to view the web page. I'm using a V4.0 HeaterMeter board for reference. To get the web page to work I had to ask my ISP to set my router to bridge mode and then I...
  17. RDOwens

    Complete HM System For Sale?

    I used to read the HeaterMeter threads. Then it dawned on me, I don't solder and I'm not good at this kind of stuff. But Christmas is coming up and I am thinking an ATC might be something Santa might bring me. I've done some searching and keep coming across posts that say folks will sell a...
  18. A

    Sous Vide with 2nd Slow Cooker?

    Curious if there is a way to use another probe and other wires from the fan to control a second slow cooker. The one issue I have is with multiple temperature cooks like a rare steak and veggies at same time. If I could have two slow cookers going using one HM with 2 probes where one probe...
  19. A

    Sous Vide Timer?

    Sous Vide Timer?... AND second slow cooker? So far I am enjoying playing with the addon sous vide to the HM. It does really work well and stays within 0.5 degrees Celsius. I have made an awesome steak... Some veggies... And some eggs Benedict. I am curious if there is a way to write a timer...
  20. A

    SSR for Sous Vide

    So I have been using my HeaterMeter for the last year and love it...thanks for the ideas and help with it!!! Now I was looking at purchasing an immersion circulator for sous vide but saw the diy...I figured maybe I could double the HM use as a PID. I see I can from the forums. It seems I just...

 

Top