BillSmith
TVWBB Pro
I’m looking for an outdoor stove for wok cooking, boiling water, and perhaps deep frying. Anyone have advice on this?
I did some searching and I think I want to get the two burner cooker stand combo from Tejas Smokers.
https://tejassmokers.com/Cooker-Stands/26
I would get the combo package which includes legs, wind guard, natural gas hose. I would also buy a wok ring. Here is the description of the stove.
CS2 - Dual Burner Portable Outdoor Cooker Stand. Choice of High Pressure, Low Pressure, or Natural Gas. With (4) Leg Extensions. For Outdoor Cooking, Camping, and Picnics
Dual height cooker stand designed for high pressure propane. The high pressure propane burners (gold color) each output 160,000 btu/hr. The low pressure model for propane and a natural gas version are also available which output 40,000 btu/hr. This dual cast iron burner CS2 series cooker stand has a large 28" x 14" angle iron top, eight heavy duty spokes over each burner, removable legs, and a handy leg storage rack at the rear of the unit. With the legs in place this dual burner cooker stand is about 30" tall which is just the right height for comfortable cooking. With the legs removed and stored in the leg storage rack at the rear of the unit, the height of the cast iron burner unit is about 15" which is perfect for tabletop or tailgate cooking and storage.
This recently re-designed cooker stand now includes a handy carrying handle which also serves to protect the brass manifold during transport. The optional WING side table extensions may be added to either or both ends. The use of one optional WING side table increases the width of the unit to 40". The use of two optional WING side tables increase the width of the cast iron burner unit to 52". An optional WG2 two burner Wind Guard (shown below) is also available. The CS2 series cooker stands features an all brass manifold with individual and adjustable needle valves for each 160,000 btu/hr cast iron burner or 40,000 btu/hr for each of either the low pressure or natural gas burners. We recommend use of a COM#1 preset regulator for the high pressure burners or a COM#5 preset regulator for use if low pressure cast burners are desired. We can supply optional gas hoses in any length requested.
I think the whole package described above with wok ring and cover will cost me about $400.
I did some searching and I think I want to get the two burner cooker stand combo from Tejas Smokers.
https://tejassmokers.com/Cooker-Stands/26
I would get the combo package which includes legs, wind guard, natural gas hose. I would also buy a wok ring. Here is the description of the stove.
CS2 - Dual Burner Portable Outdoor Cooker Stand. Choice of High Pressure, Low Pressure, or Natural Gas. With (4) Leg Extensions. For Outdoor Cooking, Camping, and Picnics
Dual height cooker stand designed for high pressure propane. The high pressure propane burners (gold color) each output 160,000 btu/hr. The low pressure model for propane and a natural gas version are also available which output 40,000 btu/hr. This dual cast iron burner CS2 series cooker stand has a large 28" x 14" angle iron top, eight heavy duty spokes over each burner, removable legs, and a handy leg storage rack at the rear of the unit. With the legs in place this dual burner cooker stand is about 30" tall which is just the right height for comfortable cooking. With the legs removed and stored in the leg storage rack at the rear of the unit, the height of the cast iron burner unit is about 15" which is perfect for tabletop or tailgate cooking and storage.
This recently re-designed cooker stand now includes a handy carrying handle which also serves to protect the brass manifold during transport. The optional WING side table extensions may be added to either or both ends. The use of one optional WING side table increases the width of the unit to 40". The use of two optional WING side tables increase the width of the cast iron burner unit to 52". An optional WG2 two burner Wind Guard (shown below) is also available. The CS2 series cooker stands features an all brass manifold with individual and adjustable needle valves for each 160,000 btu/hr cast iron burner or 40,000 btu/hr for each of either the low pressure or natural gas burners. We recommend use of a COM#1 preset regulator for the high pressure burners or a COM#5 preset regulator for use if low pressure cast burners are desired. We can supply optional gas hoses in any length requested.
I think the whole package described above with wok ring and cover will cost me about $400.