DavidAsman
New member
hey everyone... n00b here, so try to bear with me please!
got everything connected and software loaded. booted with the Edimax USB Wifi plugged in. i see my pit temp and can scroll through the settings, but i'm not getting any IP through either ethernet or wifi. i've reboot several times, used known working cat5 cables and known working router ports. i don't see the 'heatermeter' SSID.
any advice?
EDIT: from my router status page, there's zero activity coming from the rPi ethernet connection. as though nothing is connected at all. 0 bytes. it appears as though the rPi has transmit/receive lights on its connector...nothing blinking there.
got everything connected and software loaded. booted with the Edimax USB Wifi plugged in. i see my pit temp and can scroll through the settings, but i'm not getting any IP through either ethernet or wifi. i've reboot several times, used known working cat5 cables and known working router ports. i don't see the 'heatermeter' SSID.
any advice?
EDIT: from my router status page, there's zero activity coming from the rPi ethernet connection. as though nothing is connected at all. 0 bytes. it appears as though the rPi has transmit/receive lights on its connector...nothing blinking there.
Last edited: