Search results

Hey, I also use the ET-732 probes but with other probe connectors. Because order something from digikey in germany isn´t very easy I bought some other connectors. I thought the are the same but it doesen´t look like it is because I can plug my probes all the way in without any problems. The...

Hey, only wanted to say that I updated my HM to V8 and everything is working great with the HYNIX chip without replacing any bootloader files. Great work, Bryan!!

I also use a WSM and had the top vent opened the whole time for my last pulled pork. It was working not bad but I think it could work better. So does anyone have some good PID values? At the moment I work with the default ones and my last cook was for 19 hours without filling briquettes in again...

I don´t know if this is what you are looking for. In my script I have a sleep 5 command which keeps the alarm ringing for 5 seconds until it turns it to ring again if re-armed. Maybe you could try it with sleep 300 (for 5 minutes). I only tested it with sleep 5 and sleep 10 and both worked for...

At the weekend I did my first pulled pork with the heatermeter and my WSM 18.5" and nearly everything was perfect except one problem with the temperature of the food. At 2am my phone rang(great thing) and I woke up and saw that the food should be finished. As I looked at my phone I saw really...

Ah yes that are "bad news" but I mean it is working at the moment with the new bootloader so it is not a big problem more a little bug. And fixing it don't need to be very fast. Anyway if you have any betas or something like that you can send it to me an I will test it.

I found it really cheap shipping one pcb to germany for about 22$(12$ pcb, 10$ shipping) because the cheapest one I found in germany was about 40€ for a single unit production.

So does it mean I can use the rPi without any problems and it should work with the heatermeter or are there any problems because it don´t respect the config.txt? I can upload a picture of my board (when I´m at home) if you want but for me there are no identifying characteristics. I found a...

Yesterday I tried the things with replacing the files in the boot section. So what I did was: - write the raspbian wheezy image I downloaded a few days ago to the sd card - copied the bootcode.bin and the start.elf to my local drive (the files from github should be the same) - formatted the card...

There are no silly questions anymore since my problem with the wire. But yes I took the .img not the .zip. The DiskImager let you only choose .img files. I tried it with my TV at hdmi but there is no connection and no boot messages. That’s the reason I think there is a boot problem. The last...

Hey, now I got my crossover wire but again no connection. I also tried it again with raspbian wheezy and had a ethernet connection within seconds. And I tried the rPi with the heatermeter waiting for an ip-adress showing up but no luck and no ip-adress. For me it looks like it doesen´t...

I tried it again with the router but it doesen't work. Bought a crossover wire at eBay know for 2€. Now I have to wait a few days. Is it normal that I can see nothning at the monitor if I connect one with hdmi?? And how can I get to the console with a keyboard?

Network problem with raspberry pi Hey, now my HM standalone works. It was the Problem with the room temperature. Now I have another problem. I bought a raspberry pi and tried to connect it with the ethernet wire to configure the wifi. But there ist no connection with my laptop. I set the ip...

Good news for me. It was room temperature. Tomorrow I will test them at the pit. Hope this works. Thank You

Hey everybody, I have another problem again and I will try to describe it. Maybe someone had the same similar problem and knows a solution. Yesterday I tested my HM 4.0 standalone without a pit. I only wanted to know if it works over a longer time so I tested this about 2 hours. At the beginning...

Thank you very much!!! It works!

To be sure I reflashed it but that was not the problem. It was the wire:-) I took a new one and there was 'no pit probe'. Then I plugged in the probes but there was no reaction. I have the et-732. Is it possible with this probes? Because they don't go all the way in? I have to say I had not much...

Yes, the shift register is placed correctly. But I had another idea. For the 3.2 I used this shift register: http://www.reichelt.de/index.html?;ACTION=7;LA=3;OPEN=0;INDEX=0;FILENAME=A240%252F74HC595%2523STM.pdf and for the 4.0 I used the one from Texas Instruments. But I think there should not...

I connected it with a wire because of the single row. So that is not the problem. I used the same display at my HM V3.2 and it was working. So I thought it should work with the 4.0 too. Ist this right?

This is the datasheet of my LCD: http://www.reichelt.de/index.html?;ACTION=7;LA=3;OPEN=0;INDEX=0;FILENAME=A500%252FLCD162C%2523DIS.pdf Maybe someone can take a look at it and can tell me if it´s possible with this one?