Search results

thanks. i'll be curious to hear your settings too!

So back at it today. I think i have everything dialed in nicely. Question about the damper though and this might go out to Steve. I got serve pulse duration numbers figured out the other day. I got to go fully closed and open. However...my question is when i hit my target temp...don't i...

After reading about PID on wikipedia i still can't understand it. Would someone mind explaining in normal person terms what the P. I. D. stand for and why you adjust each one? Or point me towards a good read that isn't super technical? I got the servo part dialed in i think Steve. Thanks...

Good info and thank you. I will see if i can dial it in some tomorrow. I really appreciate it

I didn't set anything honestly because I didn't know what to set. Can you suggest what to change and some numbers? I can probably give it another go tomorrow after work. Just grilled a steak so it will be hot for a while.

I don't know if i was in manual mode because i honestly don't know how to get into manual mode...so i don't think so

both probes were just for keg temp.

So finally got my first test run in right now. I have a Broil King Keg. Using newest Heatermeter with Microdamper....ALL DEFAULTS. I used to own a Pitmaster IQ120. Figured i use my same technique.....which is if i wanted 225...i started with my set temp to 200.....and usually it would...

Next question is ...where can i buy a 3d printed damper case? I have zero access to a 3d printer? Anyone know of who i can talk to ?

Steve M. You nailed it! I had hell of a time getting the solder out of those holes once i removed the 2 wrong components. I had to get my wifes help. I know some people know them as solder suckers...but i had to send her up to the baby room to pull out the dreaded SNOT SUCKER as it's known...

also..i did appear to spark slightly as well...... that can't be good.

Just tested. I am not getting anything between those 2 connections.

if you need better quality let me know. after looking at those i see they really aren't the best

alright. i got some blocks to show on the LCD. preconfig the config.txt file with wifi worked.. however getting AVR Fuser error. i found https://tvwbb.com/showthread.php?67586-No-Communication-No-HeaterMeter-Board/page2&highlight=avr+fuses+error and used my meter and i have connectivity on...

Ok. So i am building the 4.3. I bought the b+ pi. So i just need to flash the openwrt fireware imagine to the SD card. Put it in the Pi. Connect pi to HM. Plug in power? Simple as that? I've been chasing 3 kids around all day so hoping to do this soon.

Hello. So lets list what i am new to. Soldering, Raspberry pi, messing with PCB's....yada yada yada. I have finally soldering everything together. I figured first step would be putting power to the baseboard/lcd board to see what i get. Not comes on the LCD> The green and yellow light light...