Search results

is this a proper fan for the micro damper. https://www.distrelec.nl/nl/axiale-ventilator-40-40-20-mm-18-12-vdc-sunon-ef40201bx-000u-a99/p/30090806

Is this what you where looking for https://www.thingiverse.com/thing:2517228

I mean how and where to install the parts on the PCB, the AD8495ARMZ part I ordered from a dutch company

I'am starting to build 3 heatermeters with thermocouple but on github the link for the thermocouple SMD part isn't available. Can somebody help me with this.

Hello, I orderd 2 MG90S servos at hobbyking and today I received them but when I looked at the servo it says TGY-90S. Can I use these servo's? Hobbyking says that these are the updated versions of the mg90S servo's with digital processor...

I was trying to connect trough my computer instead of my router. Now everything is working fine. Thanks

The address of the pc is: 192.168.1.40 the address for the hm is: 192.168.200.1 wired, 192.168.201.1 wireless I can't ping the hm with the above adresses (answer from 62.45.30.225:can't reach target network. Time-out command) edit: with wifi analyzer I can see the heatermeter(7c:dd:90:44:13:5b)

Hello, I just finished my build:) and now I can't go to the HM homepage:confused:. I got the address from the HM wired and wireless but when I enter that into the web browser nothing happens. I tried it with internet explorer and chrome and on 2 computers all with the same result. Can...

Looks like you have the white wire mod (your green wire) solderd to the wrong point. http://tvwbb.com/showthread.php?50912-White-Wire-Ground-Fix-for-LidMode-triggering-and-noise&highlight=white+wire+mod and it is difficult to see if you cut all the traces.

This was more about the version of PCB that he build, not if the rasberry Pi needs an SD card with another version. We want to order the new 4.1.4 board but want to know if this board works fine.

http://uk.rs-online.com/web/ http://www.bitsbox.co.uk/ http://www.hobbytronics.co.uk/electronic-components

Is this version 4.1.4 of the heatermeter or an earlier version

When do you think you have build and tested this board?

Has anyone build and tested this board yet? Frank

What trace exactly do I have to cut.

What I ment was the cable from the servo and the blower in the casing. You have 5 wires (3 from servo and 2 from the blower) and you have to reduce it to 4 but where. In the keystone jack in the casing? I'am building the barrel servo version 2.

How did you all connected the groundwire from the servo and the blower into the keystone jack? Can you put 2 wires at the same pin in the keystone jack in the servo casing and use a standard UTP cable, or do you have to make your own UTP cable by combining wires in the same pin in the connector...

Ok, Thanks we will download the files tomorow.

Bryan, We are going to order several Boards from the Netherlands to build the heatermeter. But the files on github.com are the old files. Are you going to upload the corrected files or do we have to fix it with a wire or will it work in most of the times. Frank