Search results

Hi Dave, the ones I have had here in the US did not have a cross over tube. Yours does #10 in the diagram. General statements on blind hole firebox bolts - to remove I heat the bolts with a torch. If the bolt looks pretty bad I leave it in place and drill and tap a new hole in the same area...

you don’t need to remove the brackets to remove the burner tubes. They are tool less. Just twist and lift

No different than cars. If it’s a classic it should live on. No one is calling from the grill museum for most of them

It’s about 1 or 2 hours to dismantle a 304 SS 250lb grill About $100.00 $80.00 in Stainless $20.00 in brass Bonus if available: Propane regulator hose assembly Useable side burners Useable cooking grids

I get a few high end grills every year. I either wholesale them to one of the high end flippers near me or scrap them. They need more marketing than I willing to do A couple things I learned. The cooking grid dimensions front to back are all the same across brands. Widths are different, but can...

I like them for free. Nice grills. They are big and weigh probably close to 300 lbs

Both of the grills can bury the thermometer needle. None of the front burners can get as hot as the east/west models

Burner tubes are shorter by a couple of inches

Here is a photo of an S-670 propane manifold assembly with an infrared burner valve at the end. The valves are 2 pieces - one control and one gas nozzle. The manifold tube is sandwiched between the valves using gaskets to seal the holes. The manifold tube is the same diameter for natural gas or...

The valves are not threaded in on those summits. You would have to plug a hole an unthreaded oval shaped hole on both sides of the manifold. You might be better off swapping the valves from the propane summit to yours.

The Q’s don’t cost much new with a warranty. A lot of people overlook them and think they need a Spirit at $500 plus to satisfy their gas grill needs. I can’t get more than $150 for a refurbished Q in my area. I think people get hung up on the portable marketing baloney of the Q and think it’s...

Does the linoleic acid correlate to a flavor? The higher the value the more flavor induced? I am not real happy with Canola oil but I am not the fry cook in the house. Right now I figure I am going to die eventually so as much as I would like to put that off I do want to enjoy fried foods in...

Those knobs don’t look right. Why would you sell a 3pack of knobs for a summit that has at least 4 burners

I remember most of them. I don’t think some of the would pass muster for kid’s programming today as shown in the past.

We are very dry in New England. On the plus side - Clear blue skies and the best foliage colors in years. Good sky watching at night. On the negative side low reservoirs and brush fires. All things being relative, nothing like the dry issues the people in the West experience

Same size as Genesis B/C of that time period. They are good parts grills with lots of common parts

It cost about $100 to rebuild one. New cooking grids, burner tube, ignition etc.

If both grills use 13 flavor bars in the firebox they can be swapped. Beware that the frames are constructed differently and the red one could be a 5 flavor bar 700 or 900

I would get some casters with a flat top for mounting and bolt them to the Spirit base. They should be tall enough to protrude from the concave base. You can get casters from Amazon or harbor freight

There might be a food grade or a caster made for biotech made out of stainless but it would probably be pricey. I would probably use a plastic plate or something non conductive between the two dissimilar metals