Search results

On my UDS I had used a permanent probe mounted to the side of the UDS and it extended to the center, about one inch below the grate.

I would but I used a standard 8 pin IC pad, I would need to manually make the change. Also, I probably would not be able to as is, because I routed alot of traces close to the pads

Geez, I havent even looked to see if the expanded metal divider is good or not. How would you even get in there to replace it.

http://myheatermeter.ddns.net/luci Beer can chicken Smoker: Double Pan Gravity Smoker 28cfm blower maxed Default settings

Lump, Any McClellan's, Lowes, HD, or any other local hardware store lol

I think they changed it in later revisions.

Yeah, I love the DP. It's so good at keeping a stable temp. If you make one, make sure you change the charcoal ash grate, to be removable. I want to modify mine, but I would need to cut it out and redo it. Makes cleaning it much easier. Now, I just let it burn down on it's own, if I want...

Mine will be easy, Double Pan Smoker, a Stumps Clone Gravity Smoker PID settings -stock Damper -Im using a RD25, but I'm not using any damper, just the 3d printed adapter to 1 inch pipe, which goes into another adapter from 1 inch to 2.5 inch pipe. Blower -BFB1012GG

The DoublePan smoker. Using stock settings with RD25(not using damper) and a BFB1012GG blower

I It was a bone in pork butt, cut it up into about 8 pieces and marinated overnight. Yep, just put it on, lol.

http://myheatermeter.ddns.net/luci Doing some Char Sui, which will be Bao tomorrow.

It's been a log time since I had to troubleshoot a TC board, but have ran into this before and I usually fix it by resoldering the TC amp. I will even work on it while it's on, so I can get feedback while I'm working on it. Even though the TC amp soldering looks good, they aren't. Even using...

Well, I have an issue that I have been trying to figure out with my port forwarding on my router. I have been trying to get Octoprint to be forward, so that I can view my 3d printer off network. But, nothing seems to work. My ip 192.168.103, and I put that into my port forwarding settings for...

You cant go wrong with Thermoworks probes, they are probably the cheapest, best, probe that works with the HM. There is already presents for them. The BBQ Guru prpbes you would need to figure out the coefficients to get them to work on the HM.

The board is pretty self explanatory, as all the spots are marked. I always start with the TC amp and the resistors and work up to the bigger parts.

When I solder the 100k resistor onto the board, I use shrink tubing completely over the wire and 100k resistor. I then route wire around the board so that the resistor does not move

That still applies to current version of the board

Dampers are nice to have, but not needed. They do take some of the guess work out of controlling your smoker and make better mount for the blower.

I haven't had been able to use the app in a very long time. Not sure of its been updated in the past 6+ months

argggg, Rain shorted out my blower connection and luckily I had a backup connection.