Search results

Great! In the meantime I think I need to take apart my heatermeter so I can see it on the monitor to see whats going on with it :(

As I struggle desperately to determine why my heatermeter just dropped off the map of wifi I would love to see some options to view: current IP address, connected network, maybe update IP / network settings. Just a thought?

I don't know the TC components were ordered preinstalled so I figured thats the best part of my heatermeter or the most reliable. I was happy to just have a 5 degree difference vs a 23 degree offset. I don't know about hot testing as it seems like there is a lot that can skew the results...

Hey all I just got a new thermocoupler. I noticed that the original I was using had an offset of 23 degrees! I had to replace it and in the process I updated to the latest software. Anyway I tried to calibrate using the typical ice in water procedure. I had to reduce the reading by negative...

Thanks for the quick reply! Not sure I understand the alarm stuff. I hear my heatermeter beeping now and not sure how or why. I am currently at 240 and want to be somewhere between 225 and 255? I bought the board soldered by bryan so that should be ok. I bought some pit probe. I have to...

Hey all two questions: 1. Setting up alarms. What is a threshold vs. a set point? Which triggers an alarm? 2. I noticed my thermocouple today is about 23 degrees low and it is bouncing around by 3 degrees within seconds? Also I had my heatermeter set to -3 last time so there is some...

Hey guys I can't seem to get my heatermeter 4.2 to work with my TX-1002X-NP. When I choose the TX1001 option I get OFF. When I change it to the ET72/73 option I get a strangely high number (probably not a surprise). I am going to grab my heatermeter 4.0 with these probes for testing! Neil

I think I fixed #1 y changing the pit target temperature to blank but when I went back to configuration the 265 was back?

Hey guys I need help with two things: 1. I need to disable the blower option all together. I can't seem to find a place to disable it but its distracting and i don't use this function so I would like to turn it off. 2. My alarms don't seem to be working. I have a low setpoint and a high...

Hey guys I want to get using my 4.2.4 heatermeter. I need suggestions on a good TC probe along with what is the "best" standard probes out there? Ideally a long long cord would be nice? Thanks a ton! Neil

Success! I had a bunch of the circled points cleaned up but I think the culprit was the one you had on the bottom left. I have NO idea why this build came out so sloppy. Perhaps it was iron temperature but my first heater meter seemed to come together much cleaner. Of course it was obvious my...

OK guys I replaced the capacitors this morning and unfortunately its not better :( I have the top two led's blinking rapidly and little to nothing on the LCD. I think something is still shorting out but faster now? Any other things that look incorrect? Thanks! Neil

Gosh thanks! I don't know how I screwed that up! I hope to finally fix this tomorrow! Thanks a lot guys much appreciated! Neil

So I noticed some build up on the potentiometer and I didn't clip the bottom leads through the board. So that didn't fix the problem but it let me see a blinking black bars on the display but they are still faded. Neil

Hey guys just fired up my new build of 4.2.4 and its not working. I powered it with the 5v usb just in case. Here is the problem: I get no display. I have the Green and Yellow led's blinking when I adjust the potentiometer to the lowest setting it appears that the blinking stops. Thats about...

Wheres here? Just curious? I ended up buying a pi on amazon and the price was about $5.00 cheaper so much closer to the b+. It seems like the prices are pretty volatile. Thanks, Neil

Too bad I like this new board. The micro sd card looks like a nicer setup and it is about $10 cheaper :)

Hey guys will the Raspberry Pi B+ work with the HM 4.x? Thanks, Neil

Mouser called me a couple times. They found me a different LED and I ended up order the socket from newark since they had it. I bought a couple extras. The lady who called actually said "hmm that's interesting I had someone else with this exact order earlier today :) " Funny! Neil