Search results

For grease maybe a slight tilt to the side, a container under and underneath the edge and then the grease and scrapings just go into that container. Hope that makes sense.

Ok, today I found a piece of scrap from my first baffle and though a bit less wider I thought it would be enough for proof of concept of the alternative design. This piece already had a crimp length wide so this adds strength and I didn't have to do it like the first one. Anyway took a bit to...

Well, today going through things had to take out my old sunbeam table top grills. Looks near exactly like a ga. But this one uses lava rocks. As I had noticed before while searching, it had a regulator that i saw on the net. So i took it out and it fit perfectly in the weber. Even the clip to...

Just to add that in my process of cleaning kinda, I found another new flavorizer plate. I also found a really good shape grate but upon closer inspection it does not fit the ga and the bars are a tad thinner. So I guess it will be used for another project.

Let us know how it works out on the ga. May be a bit crowded ?

Leaving this as a general gas ga post. As on another post, I found I had a new never used gga but it was missing a regulator. So after getting the dust off I put it in a pillow case and stored it away awaiting my finding an option for the regulator. So I grabbed another grill in a pillow case...

Some spit rods have a round section cut into the square shaft.

I doubt many of us know how to do that. My lathe knowledge is not up to the level of making a gear yet.

Ok, thanks ! Just missed those somehow.

How is the bowl attached to the burner ? I found one of those really cheap at a second hand store so might put it to use. Just not sure how things are secured. Thanks,

I made a counter weight using a large bolt, tapped it out to fit a threaded rod. Bent the end of the rod and then bought a bunch of flat washers. Now I can move it anywhere I want and can move the weight in or out to help balance things. Works good enough. Not sure the why of the plastic gear...

So I have been going through my collection, cleaning and whatever. So today I pull out a gasser. After a few seconds I remember buying it at the second hand store for little. It did not have the regulator . It was and is new, never used. Well, except for me getting another regulator to just...

Will love to see pics of it and in action !

Umm, is his big propane tanks pressure the same as what's in the 20 lb. tanks ? He does say the big tanks are unregulated.

Well, I tried to join but guess I'm not good enough. No problem, busy enough here.

Well, at this point it is a 50 /50 deal. I prefer basic and let me do the rest. The go anywhere is just a basic design and you can see what has been done to make it fit differing needs.

I think you are confusing two things. The thing I built was what is there already, the whole piece or shield. What you are mentioning here is just a flat piece to protect the shield that comes with the grill in germany. As we cannot get that whole piece here in the usa, that is what i built. My...

For my purpose I would kinda design it upside down. Thus the outer pieces would be down as legs and it would just slide under the burner. Maybe at the ends just put a small groove or some such to lock it in. The long sides will still have to be crimped to give it some strength so it doesnt sag...

No, if we keep getting what we want we would then be complaining about the price. Sell 'em cheap and then we get the fun of modding them the way we want.

Not really except the weight of the can. But if you have that 2 inches height, the charcoal grate will basically hold it in place. Some folks use pet food dishes and such so there are options.