Recent content by Marlin Schrock

David, I'm interested in building one of these, is the code posted somewhere?

Seth, what were your settings in the last graph. Curious to compare. Currently, I am trying the fanless heatermeter controlled damper approach...

On 4.0 hardware, what should the fan output be set to, Voltage or Pulse? I probably overlooked a previous post where it is mentioned... Thanks! Marlin

Further testing showed that on another pc it works fine on chrome. I will dig deeper to see what is different on that specific computer...

Would changing the header on the heatermeter to male pins and using an ribbon cable fix the physical connection challenges?

Looks to be an incompatibility with jsquery in chrome and firefox. Loads and works fine in IE 11. I hope I'm not the only one experiencing this..

Webpage is only showing dashes for temps, time not being displayed. It was working, but just stopped. Tried rebooting, but no change. Pit droid and Pit meter apps both work fine. I did perform a reset settings via the heatermeter lcd, that's the only change that I can think of.

Thanks for all your hard work!

I've came to the conclusion that I have better success with no fan and only servo damper, "naturally aspirated". The key reason is, in my opinion, the uds has fire and food in a single chamber with air intake dumping into the common chamber. So, I made a damper that attaches via 1" pipe to the...

Measuring the time of the cycle, is that peak to peak?

Trying to dial in the PID settings on a uds. I have a heatermeter (4.0 hardware version), Pit probe just under meat rack. Roto-Damper with digikey standard wiki recommended blower fan. I also have a brick divider in my charcoal basket to give the fire "structure". I started off this morning...

on the last leg: Started early this morning. http://schrock.homelinuxserver.org Eager for dinner tonight!

i would be willing to test. I have an iPhone 5 running iOs 7.02 and an iPad 2 running 6.?. I'm also familiar with testflight...

Thank you! This is most helpful.

Just pulled the butt off the smoker. Dave, I'll give those settings a go, as well as the brick "divider". What size charcoal basket are you using?