I replaced the burners a couple years ago and noticed the crossmember rusting then, but definitely wasn't as bad as is in the picture and at the time seemed like the only bad spot on the grill. A couple years later and its seems like the rust really overtook the frame. I've noticed the moisture...
I am going to attempt to do the crossmember fix this weekend. I will be getting a piece of bar stock and bolting in the new piece. When it comes to painting should I first prime the bar stock and then paint? Is one coat enough or should I do multiple coats? Also other parts of the frame I...
Thanks guys for all the good info!
I'm not sure if I'm totally understanding what it means to stay out of the plane of rotation? If the disc is held vertical are you saying i shouldn't be standing behind in that same vertical line? And I should instead be standing off to the side?
So I'm going to attempt the crossmember rehab this weekend and planning on grabbing an angle grinder. I've never used an angle grinder before...any tips for using one? I know theres some safety issues when using them because they spin like 10,000 to 12,000 rpm. I'd like to get a face shield...
So would something like this work? https://www.mcmaster.com/standard-washers/washers-4/washers-5/high-temperature-plastic-washers-8/
Or go with a stainless steel washer?
I see suggestions to use anti-seize on the bolt going through the frame and firebox. Are there any concerns with anti-seize being exposed to the heat of the firebox? I know the food wouldn't be in contact but I'm just wondering if the anti-seize would smoke inside the firebox and would there...
I understand that 316 SS has better corrosion resistance properties but how does 18/8 perform in real-world experiences? I live in Iowa and the summers can get hot and humid and the spring can be pretty wet. Any downsides to using 316?
Bruce, thanks for the great information! I've watched your video on the crossmember repair and was just starting to think of the supplies/tools I'd need to get and was thinking that it might be an expensive investment since I don't already own this but harbor freight definitely looks pretty...