<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Gerald:
I have same problem. I can get to Stoker from web with xx.xx.xxx.xxx:8080 from my office. Stokerlog hangs up at "Reading Stoker Web Interface..." in Status window. Tried "HTTP Only" also same result. </div></BLOCKQUOTE>
Gerald,
Your problem is just a little different. Running the stokerlog from your office is a little more complicated, perhaps. Since you are port port 8080 to your stoker, you would have to use the ip address in the stoker log as xxx.xxx.xxx.xxx:8080 and use the http interface. Works on mine --
here's a tip ,, make sure your router supports dynamic DNS, and if it does, go to
www.dyndns.org and get a URL for your home router, that way when your IP address changes, you can still get there. Your router will update dyndns when your ip changes. I use myhomename.dyndns.org:8035 in the Stokerlog IP address and it will connect every time. I just plugged mine on to make sure that would work. I was also shocked to find, that despite global warming, my stoker was sitting on 23.5° , not Celsius BTW.
kb