Looking for Genesis NG valves


 

Dave-MI

New member
Hi all - I have a Genesis Silver A that I am switching from Propane to NG. I have everything I need other than the valves.

As I understand it, I don't need the whole manifold (because I already have the appropriate orifices) I just need the on/off/level valves from a Genesis grill.

The Silver A is a two-burner model, so I just need two valves. Anyone have a few to sell?
 
Hi all - I have a Genesis Silver A that I am switching from Propane to NG. I have everything I need other than the valves.

As I understand it, I don't need the whole manifold (because I already have the appropriate orifices) I just need the on/off/level valves from a Genesis grill.

The Silver A is a two-burner model, so I just need two valves. Anyone have a few to sell?
Hi Dave, the Silver A has two types of manifolds - square and round. The valves are constructed differently for the manifolds.

Best to include a picture of the grill and the manifold.
 
Hi Dave, the Silver A has two types of manifolds - square and round. The valves are constructed differently for the manifolds.

Best to include a picture of the grill and the manifold.
Good you noted that. I've only seen and worked on 2 or 3 of those and did not know they had 2 different manifolds. The ones I saw were round with screw in valves
 
Yeah, there are two different valves and also slightly different graphics on the control panel.

The round one has less "sweep" for the valves with Low around the 5-oClock position.

The square one has more sweep with Low at the 3 oClock position

Below pics are for a Silver B, yet it should also apply to the Silver A

round on the right square on the left. the round one is older than the square one.

1760284131273.png

older style control panel with less valve sweep ( round manifold )

1760284476228.png

newer style control panel with more valve sweep ( square manifold )

1760284452465.png
 
Hi Dave, the Silver A has two types of manifolds - square and round. The valves are constructed differently for the manifolds.

Best to include a picture of the grill and the manifold.
Thanks - my manifold is the round type.


1000063285-jpg.120958
1000063286.jpg
 

Attachments

  • 1000063285.jpg
    1000063285.jpg
    94.3 KB · Views: 15
Thank you for the pictures. You need valves from a round manifold Silver A, B or C

Or

You can replace the manifold assembly with a square one from a Silver A or a 2005/2006 2 burner Spirit
Thanks for all of the fitment help!

So I'm looking for these parts, or I could still do a swap with someone wanting to switch from NG to propane.
 
I would keep an eye out for the appropriate silver A or B on FBMP, they are generally easy to find and cheap. You can then swap over whatever parts you need and resell the donor grill.
 

 

Back
Top