Finishing touches on WSM cart


 
Frank H

Frank H

TVWBB Gold Member
I hope I'm not boring you with these updates. I just wanted to show how I finished off the painting of my WSM cart.
3375264edb74674c7eeaa9e43e81f18b_zps4d666779.jpg


I haven't installed the table support yet. A friend at work is going to bend some rod for me when I give him the dimensions.
d30cd5c281338122b7d718fce83ce9dd_zpse2a85e1e.jpg


978bc5e542e2059043dfe13e684a1417_zps40b03548.jpg


I will post a pic when it's done and my WSM is on board. Then I promise - no more about this.

After 3 coats of good spar urethane on the natural wood surfaces. The paint's all done.

3612941c0778f1f116a25fdddcb0d082_zpsfb3d7ddd.jpg


3d0f9d071dee4b0661027e9e53577a17_zps6e1f1504.jpg


73baf30c62401f2608c2cfb4be8df84d_zps537bbad3.jpg
 
Last edited:
No, I'm glad you've been sharing updates! This is something I could maybe actually do, with some help from my dad. His dad was big into woodworking, so my dad has picked up on some of the skills-- me, not so much.
 
I FINALLY got around to installing the brace for my drop down table. I scrounged a length of 3/8 rod at work. (Dumpster diving) my buddy bent it into the correct shape per my design (which I swiped from peter lindfors). I drilled the holes in the wood frame and popped the brace in....fastened a couple wooden blocks on the underside of the table which hold the brace in place when you swing it up......when you are done you just lift the table , the brace drops out and the table folds away. I think I'm going to steal another idea of peters and install a lid hanger on the underside of the table.. Here's a little video...sorry I didn't dress better. My wife says I look like an unmade bed.:eek:

http://i1265.photobucket.com/albums...fecea8d4b91243c45a318dd887ec9_zps33f1c596.mp4
 
You must log in or register to reply here.

 

Back
Top