easiest way to reset the HM


 
N

NumiO

New member
Hi,

I have been fiddling a bit to much with settings all around, I feel like the best thing would be to just start from scratch. What is the easiest way do go about this? Can I do it from the webUI somehow, or do I need to get the SD-card out?

Thanks!
 
If you need to reset the Network side of things then doing a "No Restore" on the SD card would get you back to stock on the SD card. If you just need to reset the Heatermeter settings then on the Heatermeter LCD, there is a Reset Yes/No. That will reset the Heatermeters settings back to stock

No Restore
 
If you have access to the Webui, just go to the System -> Backup / Flash Firmware page and reflash the image, except uncheck the "Keep settings" checkbox. If you have the latest snapshot firmware installed, you can do it from the HeaterMeter UI (Reset configuration)
 
Last edited:
Thanks!

Its especially the network (wifi) settings that are screwed up. I have switched between Client and AP a few times, and not really paid enough attention. Now nothing seems to work anymore, and I dont know what I accidentally did along the way.

Doing a reflash of the firmware from the WebUIshould take care of it? I did a reset configuration from the HeatMeter UI, but I guess that only resets the "BBQ-settings".
 
Exactly, the current "release" version of HeaterMeter only resets the HeaterMeter itself. The snapshot firmware resets that and the OpenWrt configuration (wifi, network, etc) as well.

From the webui just make sure the "keep settings" box is unchecked and it wipes the recovery partition too.
 
You must log in or register to reply here.

 

Back
Top