Alan Soden
TVWBB Fan
ordering a compression latch as soon as i can find one that fits inside the 1/2 inch CB door, but until then may have a solution for the current handle.
it looks like the threaded brass insert is an expansion anchor. with the added thickness of the CB door (and i may have put on an extra washer my parts got kind of mixed up) the stock bolt was definitely not reaching all the way into the anchor. i think the hole in the handle is much deeper than that anchor. i replaced the stock bolt with a much longer stainless screw. in fact i needed a bolt on it as a spacer. holding so far! sorry the pic is a little blurry
[/url][/IMG]
it looks like the threaded brass insert is an expansion anchor. with the added thickness of the CB door (and i may have put on an extra washer my parts got kind of mixed up) the stock bolt was definitely not reaching all the way into the anchor. i think the hole in the handle is much deeper than that anchor. i replaced the stock bolt with a much longer stainless screw. in fact i needed a bolt on it as a spacer. holding so far! sorry the pic is a little blurry