I can't seem to connect to my local wireless area network. I have tried resetting the settings per the instructions on the wiki page located at (https://github.com/CapnBry/HeaterMeter/wiki/HeaterMeter-4.x-Software). I tried both the config.txt method as well as the gui method. I have tried rebooting several times after trying both methods. I made a backup of the original config.txt file just in case as well and retried.
I feel as though I know where things go wrong with the gui method. When I get to the point in STEP 5 where you hit apply and save, I lose connectivity to the HM every time and lose connectivity. I switched to my WLAN and tried both 192.168.201.1 and 192.168.200.1 to see if I can ping or connect with no luck.
I am not sure what to do from this point. I am likely missing something simple, but trying to administer is, well, difficult. Any suggestions? I am almost thinking about re-imagining the SD card.
I feel as though I know where things go wrong with the gui method. When I get to the point in STEP 5 where you hit apply and save, I lose connectivity to the HM every time and lose connectivity. I switched to my WLAN and tried both 192.168.201.1 and 192.168.200.1 to see if I can ping or connect with no luck.
I am not sure what to do from this point. I am likely missing something simple, but trying to administer is, well, difficult. Any suggestions? I am almost thinking about re-imagining the SD card.